Breaking News
Product News
Content posted in May 2000
<<   <   Page 2 / 5   >   >>
Entegris VP Dauwalter made COO
Product News  
5/17/2000   Post a comment
Compact module provides brush dc motor control
Product News  
5/16/2000   Post a comment
ACS-Tech8O has launched its Unilite family of dc motor control modules, which provide single- and dual-axis control for brush dc motors in a compact 1.6 x 5.3 x 3.7-inch form factor.
Dense echo cancellers roll
Product News  
5/16/2000   Post a comment
Modules connect to Universal Serial Bus
Product News  
5/16/2000   Post a comment
The JSB-450 Series of digital I/O and driver modules from J-Works Inc. allows users to interface to digital inputs and outputs from any Universal Serial Bus (USB).
Projector touts a universal interface
Product News  
5/16/2000   Post a comment
Liquid-crystal display monitors blazed the trail in digital interfaces between a computer and a display peripheral, and electronic projectors are now following that lead.
Connectors mix their power pins
Product News  
5/16/2000   Post a comment
2E SysCom Inc. has introduced a mixed-pin type F and H PowerDIN interconnect with 24 F pins at 6 amps per pin and seven H pins at 15 A per pin.
Cabling handles high speed
Product News  
5/16/2000   Post a comment
Meritec says that its 2-mm HPM-5 cabling system, compatible with the IEC 1-76-4-101 standard, has a design that features a strain relief without requiring overmolding.
HDTV video generator packs flash
Product News  
5/16/2000   Post a comment
Team Systems Inc. has added a video generator that can either be programmed from a PC or operated with a remote control box
Daughterboard handles four T1s
Product News  
5/16/2000   Post a comment
Commetrex Corp. has introduced a daughterboard for its MSP-320 Media Gateway DSP resource board that integrates four E1/T1 interfaces. Slated for release in July at under $900, the daughterboard "eliminates the need for separate network-interface boards," said Ben Feldgajer, director of embedded systems design.
SCSI box spans the generations
Product News  
5/16/2000   Post a comment
Rancho Technology Inc. has announced a family of standalone SCSI boxes that claim to connect all legacy SCSI peripherals to a low-voltage-differential SCSI bus.
CPU board has speed choices
Product News  
5/16/2000   Post a comment
The Computer Systems Group of Carlo Gavazzi Mupac Inc. has launched a two-slot processor board for 6U Compact-PCI that offers a choice of processors at speeds ranging from 300 MHz to 800 MHz.
PCI serial board suits industrial
Product News  
5/16/2000   Post a comment
The PCI-xxM-1S boards from Acces I/O Products provide RS-422 and RS-485 serial communications for PCI at up to 460.8 kbaud in harsh industrial environments. Their drivers/receivers can drive up to plus/minus 60 milliamps on balanced lines and receive differential inputs as low as plus/minus 200 millivolts.
Celco's film recorder makes HDTV
Product News  
5/16/2000   Post a comment
Among the equipment being launched at SID is Celco's eXtreme HDR, a high-definition film recorder for the motion picture industry that can image an HDTV frame to film in as little as 5 seconds.
Application-specific lens features quick switching
Product News  
5/16/2000   Post a comment
DigiLens Inc.'s line of application-specific integrated lenses (ASILs) targets a variety of display and filtering applications in electronic projectors, rear-projection monitors, TVs and miniature "bring-to-the-eye" applications.
Software can simulate displays in 3-D
Product News  
5/16/2000   Post a comment
Lambda Research Corp. claims that Version 2.1 of its TracePro display simulation software is extremely easy to use for 3-D virtual prototyping
Backlights boasts bright, even light at low power
Product News  
5/16/2000   Post a comment
LumiTex Inc. says that its MicroLens LED-based backlighting panels provide uniform, high-output, low-power backlighting in a choice of colors.
<<   <   Page 2 / 5   >   >>


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Most Recent Comments
Like Us on Facebook
Special Video Section
The LTC2380-24 is a versatile 24-bit SAR ADC that combines ...
In this short video we show an LED light demo to ...
02:46
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...