Every function in this power management IC Product News 1/31/2004 Post a comment austriamicrosystems touts its AS3603, an enhanced version of its AS3601 power management platform, as an industry benchmark for functionality and flexibility for mobile applications including cell phones, PDAs, and digital cameras. It features a DC/DC converter and ultra-low power LDOs, all programmable in 0.05-volt steps. The AS3603's feature set also includes a a driver for white LEDs, and a programmable 1-watt audio amplifier. The company says this chip takes up less than half the space of co
250-V MOSFETs in SO-8s bite into RDS Product News 1/31/2004 Post a comment Vishay Siliconix says its trio of new 250-volt N-channel TrenchFETs offer the lowest on-resistance available in the SO-8, PowerPAK SO-8, and D2PAK packages for power MOSFETs rated at this voltage. Vishay cites a maximum on-resistance of 155 milliohms at 10-V gate drive for the Si4434DY and Si7434DP.
How poor packaging kills good PCB designs News & Analysis 1/30/2004 Post a comment Package parasitic inductance has a huge impact on PCB design and performance. In this excerpt from his recent book, PCB design guru Lee Ritchey (right) shows how to avoid VCC and ground bounce caused by poor IC package design.
Switch technology supports broadband differential signaling Product News 1/30/2004 Post a comment There's a new class of switch products will enable the handling of differential broadband signals in advanced high-bandwidth applications, according to Pericom Semiconductor Corp. The company's line of application specific standard products (ASSPs) now includes switching solutions that address applications requiring up to 700 MHz of bandwidth.
More options available for mini pushbutton switches Product News 1/30/2004 Post a comment The new MB2000 series of miniature pushbuttons from NKK Switches offers greater design flexibility with a variety of styles and options. The miniature pushbutton switches are available in single pole, double pole, and four pole, double throw configurations, as well as momentary and alternate circuits.
Roving eye for Mars forces CCD rethink News & Analysis 1/30/2004 Post a comment Behind the spectacular panoramic images beamed back from Mars in recent weeks is a full-custom CCD imaging chip designed to meet the stringent demands and environmental conditions of the Martian surface. Its creator, former JPL engineer Mark Wadsworth (right), discusses the design challenges behind the chip.
35-amp connectors target telco apps Product News 1/30/2004 Post a comment Anderson Power Products offers two new 35-amp power drawer connectors that are used for "N + 1" power supply and rectifier systems for server, telecommunications and networking applications. The connectors are UL verified for cross mating with competitive products, which offers additional sourcing alternatives for designers.
Optical interconnect compatible with MT and ceramic ferrule technologies Product News 1/30/2004 Post a comment Teradyne Inc.'s Connection Systems Division (TCS) announced the company's first entry into the optical interconnect market with the introduction of the HD-Optyx optical connector. The company says it's the first modular optical interconnect that is compatible with both the high-density MT ferrule and mature, higher performance 1.25-mm ceramic ferrule technologies. This gives system designers greater flexibility by allowing them to choose 1.25-mm for system compatibility, MT for density, or both
Quarter-brick VICs can deliver 600 watts Product News 1/30/2004 Post a comment Vicor Corporation has expanded on its VIC-in-a-Brick 48-to-12 volt bus converter with a family of nine intermediate bus converter modules (IBCs) that provide a fixed 3- to 48-volt output (3, 4, 6, 8, 9.6, 12, 16, 24, 48 volts) from a nominal 48-volt (38-55 V) input. These high-efficiency quarter-brick versions, delivering up to 100 amps or 600 watts, incorporate V • I Chip technology (July 7, p. 63) and provide a traditional brick-style bus solution for designers who at the same time desire
Layout, synthesis sales boost Magma results News & Analysis 1/30/2004 Post a comment Citing strong sales in IC physical design and synthesis, Magma Design Automation exceeded Wall Street consensus for its fiscal 2004 third quarter, ending Dec. 31, 2003. The company posted a profit of $0.16 per share on revenue of $31.1 million.
Streamlining metro core central offices News & Analysis 1/29/2004 Post a comment As carriers continue looking for ways to reduce capital and operating expenses while delivering higher customer satisfaction, the metro core aggregation system (MCAS) has evolved as a way to streamline aggregation and provisioning in metro-core central offices (COs).
Latency, deskew in metro networks News & Analysis 1/29/2004 Post a comment A key factor in the success of metropolitan-area network (MAN) applications will be the use of virtual-concatenation (VCAT) technology to maximize bandwidth efficiency and provide optimal granularity for simultaneous transport of multiple protocols.
Desktop supplies sit high atop portables Product News 1/29/2004 Post a comment FOCUS ON Desktop Power - Greater power-density and extended-portability requirements are quietly driving AC/DC desktop (i.e., external) supplies to new highs in the PC and medical markets. Previously, these plastic-encased systems arrived to compete seriously as a robust, high-performance universal-input switchmode power solution against PC in-the-box supplies. Now, they're being called on to deliver even higher performance in environments where real estate continues to shrink, leaving no room f
NI's latest 6-1/2-digit DMM is a PCI bus plug-in Product News 1/29/2004 Post a comment Priced at less than $2000, here's a system-oriented PCIbus DMM with a 1.8-Msamples/s digitizer and solid-state relays to handle range and function changes. This combo gives you speed, 6-ppm DC voltage accuracy, and sensitivity into the microvolt regime.
Review: White LED light guides illuminate 3G cell phones Product News 1/29/2004 Post a comment Global Lighting Technologies (GLT), Inc. says its new family of MicroLens molded white LED light guides are the brightest, most efficient, most cost-effective backlighting solution available for today's 3G cell phones. Check out the details in Gina Roos' review.
Report Casts Doubt on Sony's "90-nm" PSX Processor Product News 1/29/2004 Post a comment A key chip in Sony's Playstation X game consoles was implemented in a 130-nm manufacturing process even though Sony announced plans to implement the combination chip in a 90-nm process, the technology and patent analysis firm Semiconductor Insights (Ottawa, Canada) reported on Thursday (Jan. 29.)
EDA startup 'views' OpenAccess database News & Analysis 1/29/2004 Post a comment Claiming to offer the first independent commercial viewer for the OpenAccess database, startup MicroEDA Corp. this week (Jan. 28) is announcing the MicroVerify suite of physical design viewing and verification software. It allows users to see "just about anything," said Simon Garrison (right), MicroEDA CEO.
What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.