Design Con 2015
Breaking News
Content tagged with Analog ICs
posted in October 2000
Page 1 / 2   >   >>
TI claims its chips are in 45% of ADSL equipment
News & Analysis  
10/31/2000   Post a comment
DALLAS -- Texas Instruments Inc. today predicted that its analog line driver shipments this year enable eight million asymmetrical digital subscriber line (ADSL) ports to deployed in the field in 2000. That total is 25 times greater than TI's shipments in 1999, according to the Dallas company.
TI invests in U.K.-based RadioScape, plans DSPs for digital radio
News & Analysis  
10/27/2000   Post a comment
LONDON -- Texas Instruments Inc. today announced plans to develop digital baseband chip solutions using its digital signal processor (DSP) technology and software from RadioScape Ltd., a London startup. TI also said it has invested an undisclosed amount of money in four-year-old RadioScape, which is focused on software for the Eureka-147 digital radio standard for consumer products.
Microchip to acquire TelCom for $300 million in stock
News & Analysis  
10/27/2000   Post a comment
CHANDLER, Ariz.-- In a move to quickly expand its analog portfolio for microcontroller customers, Microchip Technology Inc. here today announced plans to acquire TelCom Semiconductor Inc. of Mountain View, Calif., for $300 million in stock.
Integrated A/D converters increase the resolution of 8-bit microcontrollers
News & Analysis  
10/26/2000   Post a comment
Many of today's typical analog signal-processing systems are built around a microcontroller with integrated A/D converter. However, the maximum amplitude of the analog signals to be processed is often not large enough to utilize the full dynamic range of the integrated converter, so designers typically use external operational amplifiers to amplify those signals.
NEC reverses last year's loss with $190 million profit
News & Analysis  
10/26/2000   Post a comment
TOKYO -- NEC Corp. today reported net income of $190 million (20.5 billion yen) for the six months ended Sept. 30, compared to a $457 million loss for the same period a year ago. Sales for the first fiscal half totaled $22.9 billion (2.48 trillion yen), compared to $21.2 billion for the similar 1999 period. The Japanese electronics giant said it was on target to reach its projected net income of $1.85 billion by March 31, 2003. The sales goal for the fiscal year ending March 31, 2003 is $62 bil
Former CEO of Burr-Brown to head TI's catalog analog unit
News & Analysis  
10/26/2000   Post a comment
TUCSON, Ariz. -- Syrus Madavi, credited by analysts for turning around Burr-Brown Corp. during his seven-year tenure as CEO, has been named vice president at Texas Instruments Inc. and the head of TI's Advanced Analog Products (AAP) organization.
LSI Logic's Q3 sales up 35%; bullish about Q4
News & Analysis  
10/24/2000   Post a comment
MILPITAS, Calif. -- Citing strong demand for its communication chip products, LSI Logic Corp. here today beat the street by reporting sales of $728 million for its third quarter ended Sept. 30, a 35% jump over the $540 million posted in the like period a year ago. Net income before amortization of goodwill and other special items was $114 million, or $0.33 per diluted share, compared to $55 million, or $0.17 per diluted share, a year ago. Analysts estimated that the company would report earnin
RapidIO camp targets net equipment
News & Analysis  
10/23/2000   Post a comment
Infiniband requires design trade-offs
News & Analysis  
10/23/2000   Post a comment
Linear's 1Q sales grows 57%
News & Analysis  
10/17/2000   Post a comment
MILPITAS, Calif. - Analog-chip maker Linear Technology Corp. here today reported sales of $232.1 million in its first fiscal quarter ended Oct. 1, an increase of 57% over the $147.5 million figure posted in the like period a year ago. The company also reported a net of $102.2 million, or $0.31 a share, in the quarter, an increase of 75% over $58.5 million, or $0.18 a share, posted in the year ago period.
Tality, Sirius collaborate on 3G handset designs
News & Analysis  
10/17/2000   Post a comment
SAN JOSE, Calif.-- Tality Corp., a design subsidiary of Cadence Design Systems Inc., here today announced plans to co-develop third-generation (3G) handsets and other products with intellectual-property (IP) core supplier Sirius Communications NV. Under the agreement, Tality will incorporate Sirius' line of baseband chip cores into its 3G design services. The two companies aim to accelerate the design cycle for 3G wireless multimedia information devices, such as smart phones, PDAs, and other pr
National adds 'virtual prototyping' to Web-based tools
News & Analysis  
10/17/2000   Post a comment
SANTA CLARA, Calif. -- National Semiconductor Corp. this week is expanding its online engineering workbench to include a phase-locked loop (PLL) simulator, an enhanced power simulation tool, and a one-of-a-kind thermal analysis system for evaluating board designs with "virtual prototyping" capabilities. National said the enhanced Webench 2.0 system will not only speed development of products by chip customers, but it w
Filterless Class D simplifies audio amplifier design
Design How-To  
10/17/2000   Post a comment
Audio-power-amplifier systems have traditionally used linear amplifiers, which are well known for being inefficient. A linear Class AB amplifier is designed to act as a variable resistor network between the power supply and the load.
Vigilance applied early verifies chips
News & Analysis  
10/16/2000   Post a comment
Deep-submicron processes mean that more gates and therefore more functionality can reside on a single die. But verifying those functions and ensuring that silicon is adequately tested is no trivial matter.
Noise awareness catches timing flaws
News & Analysis  
10/16/2000   Post a comment
In the move to ultradeep-submicron processes-at 0.25- micron design rules or below-system-on-chip designers are finding new challenges in achieving timing closure.
Deep signal integrity can be assured
News & Analysis  
10/16/2000   Post a comment
These days, there is a lot of noise about signal integrity and design integrity in deep-submicron system-on-chip designs. And there is a good reason: Shrinking processes and higher frequencies mean even second-order physical effects can create problems.
Physics dictates priority: design-for-test
News & Analysis  
10/16/2000   Post a comment
The bedrock problem of testing and verifying complex systems-on-chip-the subject of this week's Focus section on deep-submicron design-is colliding with the basic physical limits long predicted for CMOS technology.
Peregrine teams with Mini-Circuits in RF components for base stations
News & Analysis  
10/16/2000   Post a comment
SAN DIEGO--Peregrine Semiconductor Corp. here today announced an alliance with Mini-Circuit Lab of Brooklyn, N.Y., to develop and market advanced radio-frequency components for RF base stations, based on Peregrine's Ultra-Thin Silicon (UTSi) technology.
UMC, Virtual Silicon ink IP deal in 0.13-micron space
News & Analysis  
10/16/2000   Post a comment
SUNNYVALE, Calif. - In a move to beef up its new 0.13-micron process technology offerings for foundry customers, Taiwan's United Microelectronics Corp. here today announced a deal with Virtual Silicon Technology Inc., a supplier of intellectual-property (IP) cores for the semiconductor industry. Under the terms, Virtual Silicon will make available its eSilicon family of embedded-component libraries in UMC's 0.13-micron process technology. Dubbed WorldLogic, UMC's 0.13-micron process technology
TI's Burr-Brown A-to-D converter handles 500-kHz sampling
News & Analysis  
10/13/2000   Post a comment
TUCSON, Ariz.--Texas Instruments Inc.'s Burr-Brown operation today said it was introducing the industry's fastest six-channel, simultaneous-sampling analog-to-digital converter. The new ADC chip operates at a 500-kilohertz sampling rate and is designed for motor control and power monitoring applications.
TI, Troy develop cell-phone wireless printing with Bluetooth chips
News & Analysis  
10/13/2000   Post a comment
DALLAS -- Texas Instruments Inc. here said it is collaborating with a subsidiary of Troy Group Inc. to enable wireless printing from cellular phones using Bluetooth technology. The capability will use TI's recently introduced Bluetooth chip set, which is fabricated in 0.18-micron process technology and claimed to be the first semiconductor solution to fully integrate software for the wireless standard in ROM (see Sept. 19 story).
Pixelworks, Analog Devices target single-chip LCD solution
News & Analysis  
10/12/2000   Post a comment
TUALATIN, Ore.--Pixelworks Inc. here and Analog Devices Inc. today announced they will work together to combine ADI's analog and digital receiver technology with Pixelworks' ImageProcessor ICs for a single-chip solution serving high-performance dual-interface displays. The partnership aims to create a one-chip solution for all of the functions needed to operate a liquid-crystal display (LCD) monitor.
Demand for power engineers shows no signs of slowing
News & Analysis  
10/12/2000   Post a comment
The demand for power engineers is showing no signs of running out of juice. "Business is tremendous. We can't supply good-quality power electrical engineers fast enough," said Richard Cardarella, president of Power Technology Associates, a recruiting firm in Sharon, Mass.
Microtune enters BiCMOS foundry pact with Germany's X-Fab
News & Analysis  
10/12/2000   Post a comment
PLANO, Tex. --Dallas area startup Microtune Inc. here today announced a manufacturing agreement with Germany's X-FAB Semiconductor Foundries Group, which will provide BiCMOS processes for advanced radio-frequency ICs beginning in early 2001. Under the pact, Microtune will use X-Fab's new 0.6-micron double-poly, double-metal BiCMOS technology for analog and mixed-signal chips, which are being aimed at RF broadband communications. Terms of the new foundry agreement were not released.
Infineon applies new SiGe BiCMOS process to 10-GHz PLL
News & Analysis  
10/11/2000   Post a comment
MUNICH -- Infineon Technologies AG today introduced its silicon-germanium BiCMOS technology to support high-speed, low-power IC designs for next-generation mobile communications. The Munich-based chipmaker also said it has implemented a 10-GHz phase-locked-loop (PLL) circuit using the B7HFc process.
Signal and noise levels underline ADSL line driver, receiver design
News & Analysis  
10/10/2000   Post a comment
ADSL transmissions are affected by signal and noise levels on the telephone line, which appear in specific segments of the frequency spectrums. TI's Jim Quarfoot offers pointers for driver/receiver design.
SiGe taxes RF IC design methods
News & Analysis  
10/9/2000   Post a comment
Modem split boosts performance
News & Analysis  
10/9/2000   Post a comment
Reducing Bluetooth components
News & Analysis  
10/9/2000   Post a comment
Multilayer ceramics ups performance
News & Analysis  
10/9/2000   Post a comment
Chip-scale packaging benefits RF
News & Analysis  
10/9/2000   Post a comment
Page 1 / 2   >   >>


Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
<b><a href=Betajet">

The Circle – The Future's Imperfect in the Present Tense
Betajet
5 comments
The Circle, a satirical, dystopian novel published in 2013 by San Francisco-based writer Dave Eggers, is about a large, very powerful technology company that combines aspects of Google, ...

Max Maxfield

Recommended Reads From the Engineer's Bookshelf
Max Maxfield
27 comments
I'm not sure if I read more than most folks or not, but I do I know that I spend quite a lot of time reading. I hate to be idle, so I always have a book or two somewhere about my person -- ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...