Alert reader Caron Williams notified me that 2014 marks the 50th anniversary of TTL (transistor-transistor logic). Wikipedia says that although TTL was invented in 1961, TI released the 5400 family of IC’s in 1964, and that the 7400 series in plastic came out two years later. Since TTL is practically synonymous with the 5400 and 7400 series, why not offer 50th birthday congratulations?
Remember that the IC was invented just a few years before TTL came out. Other kinds of logic were commonly used, like DTL (diode-transistor logic) and RTL (resistor-transistor logic). In fact, the Apollo guidance computer was made entirely from RTL components, using several thousand identical ICs, each containing a pair of three input NOR gates.
The Apollo guidance computer IC.
The schematic is clear: RTL logic was barely digital. It wasn’t uncommon for RTL users to bias the transistors nearly linearly and use them as amplifiers. But RTL persisted into the 70s, and in the late 60s we were using gobs and gobs of Fairchild parts for Apollo ground support equipment.
The perfect gate can only assume two states, and RTL’s linearity was exactly the opposite of what the digital world strived for. TTL was designed to approach that ideal. Like an op amp, we also want zero output impedance, and many TTL gates used a “totem pole” configuration of transistors to offer plenty of drive and sink capability.
A 74LS00 dual-input NAND gate. Note the totem pole output transistors.
As mentioned, the anonymous experts at Wikipedia believe the 5400 series predated the much more common 7400 family by a couple of years. The main difference between the two was the temperature range: 5400-series devices generally operated from -55C to 125C, while the 7400 parts, housed in inexpensive plastic packages, were rated from 0C to 70C. Though the 5400 family was often called the “military” version, a lot of commercial applications demanded their extended temperature range.
TTL devices were either SSI (small scale integration), which meant one package contained a couple of flip flops or a few gates, or MSI (medium scale integration), which used more complex parts like multiplexors. The 74181 was an example: It contained an ALU that could add, subtract, and do logic operations on two four-bit inputs. The DIP package had 24 pins, which was an enormous number in those days.
By the late 60s most computers had oceans of TTL components. The following picture is the CPU board from a Nova 1200 16-bit minicomputer. There were no MOS memories at the time. Another board held core memory. All of these DIP packages are 7400-series TTL devices.
A Nova logic board. The dimensions are in inches. These boards were enormous.
Components were so expensive that the earliest Novas used one 74181 four-bit ALU. It pushed a word through one nibble at a time.
As time went on many versions of the 7400/5400 devices appeared. . . . This article continues on EE Times' sister site, Embedded.com.
Other content by Jack Ganssle: