Breaking News
Max’s Cool Beans

I Became a Fan of Radfan at EE Live! 2014

NO RATINGS
View Comments: Newest First | Oldest First | Threaded View
SimonBarker
User Rank
Author
Re: PC fans worked for me
SimonBarker   4/15/2014 4:21:25 AM
NO RATINGS
Hi Max, thanks for the nice write up. On the topic of cats, here's a photo of one of our customers cats who very much enojoys his Radfan https://twitter.com/Pinschat/status/399119678330904576/photo/1

Max The Magnificent
User Rank
Author
Re: PC fans worked for me
Max The Magnificent   4/14/2014 9:42:59 AM
NO RATINGS
@anon: ...a spot favored by the cat, whose fur accumulated on the fans...

One of those things you don't consider on the initial design LOL

anon6223816
User Rank
Author
PC fans worked for me
anon6223816   4/12/2014 8:55:47 AM
NO RATINGS
I had a simiar idea a few years ago.  I bought a box of quiet computer fans from a surplus dealer, hooked them all in parallel to a husky wall-wart power supply, and put them behind and beneath the hot-water radiator in the kitchen to push more air through the radiator and to improve the circulation of warm air in the room.  It made a slightly-perceptible difference in the room temparature, but it was definitely noticeable when next to the radiator -- a spot favored by the cat, whose fur accumulated on the fans and necessitated occasional de-furring ;-).

zeeglen
User Rank
Author
Re: Forced Air
zeeglen   4/9/2014 11:58:06 PM
NO RATINGS
In an older home near Ottawa we had baseboard hot water radiators, and the air temperature was very inconsistent in different areas.  Improved that by installing vents in the floors at opposite ends of the house and running 4 inch fans constantly - the kitchen and living room ends blowing down into the basement, the bedroom ends blowing upwards so that the air was always kept in circulation throuout the house.  Much more comfortable after that.

antedeluvian
User Rank
Author
Forced Air
antedeluvian   4/9/2014 8:19:27 PM
NO RATINGS
Newer homes in North America (at least up here in Canada) use forced air heating (amd cooling). That is we have a natural gas (normally)  furnace in the basement and warm air circulated though the house in ducts and feed into a room through an opening called a register. Since we have the ducting, airconditioning is frequently added to the climate control.

There are some products that are similar to in idea to Radfan, and some that might even be integrated into the IoT.

To boost the flow there are register booster fans.

To regulate the output there are automatic registers.

I actually built my own register booster fan- my employer makes power supplies with cooling fans so we have many knocking around. So a fan plus power supply was simple, but it didn't seem to make much difference to the room temperature. I could've entered it for a remarkably short presentation in the gadget smackdown at EE Live.

I should mention there are register deflectors for when your furniture obstructs the air flow.

 

 

Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed