Design Con 2015
Breaking News
Maxís Cool Beans

Zapping Things With ESD Ė Just One More Service I Offer

NO RATINGS
Page 1 / 2 Next >
View Comments: Newest First | Oldest First | Threaded View
<<   <   Page 7 / 10   >   >>
Max The Magnificent
User Rank
Blogger
Re: power strip and ground plug adapter
Max The Magnificent   8/14/2014 10:24:24 AM
NO RATINGS
@zeglen: A banana plug will fit directly into the outlet ground hole without needing an adapter.

Well, you have to "splay" the end out a bit, and even then it's not a perfect fit -- I think these adapters will do a better job (but they are WAY expensive for what they are)

zeeglen
User Rank
Blogger
Re: power strip and ground plug adapter
zeeglen   8/14/2014 10:18:01 AM
NO RATINGS
A banana plug will fit directly into the outlet ground hole without needing an adapter.  It does help to remove the banana plug plastic insulator sheath, not needed in this application.

Max The Magnificent
User Rank
Blogger
Re: Maybe...
Max The Magnificent   8/14/2014 10:16:31 AM
NO RATINGS
@David: ...The best solution would be to get a mains cable with a proper 3-pin plug,  cut the...

One possible problem with this approach is that if you cut the banana plug off the lead, you might lose the 1M Ohm resistor (these are sometimes mounted in the babana plug itself) -- that's another reason why Wnderer's solution is favorite.

Max The Magnificent
User Rank
Blogger
Re: Maybe...
Max The Magnificent   8/14/2014 10:14:38 AM
NO RATINGS
@David: ...The best solution would be to get a mains cable with a proper 3-pin plug,  cut the...

This is what I was planning on doing (except using plugs that are designed for you to wire up yourself) until Wnderer suggested using the existing banana plugs on the wristbands/mats along with these $7 ground plug adapters.

Max The Magnificent
User Rank
Blogger
Re: power strip and ground plug adapter
Max The Magnificent   8/14/2014 10:11:52 AM
NO RATINGS
@Wnderer: Get a powerstrip and one of these $7 ground plug adapters.

This is obviously the way to go -- I'm going to order the adapters right now -- Max

Wnderer
User Rank
CEO
Re: power strip and ground plug adapter
Wnderer   8/13/2014 7:46:03 PM
NO RATINGS
@David Ashton Great little gadget, much easier than my idea if you can get them easily.


Digikey has them.

 

 

David Ashton
User Rank
Blogger
Re: power strip and ground plug adapter
David Ashton   8/13/2014 6:17:14 PM
NO RATINGS
@Wnderer....sorry, only noticed this post after I posted mine above.  Great little gadget, much easier than my idea if you can get them easily.

David Ashton
User Rank
Blogger
Re: Maybe...
David Ashton   8/13/2014 6:14:31 PM
NO RATINGS
@Max...sorry to rain on your parade (or pee on your fire) but I would say 100% of all the brick type laptop and other power supplies I have ever taken apart (and there have been a few) have been switching types with the output isolated from the mains.

A mini-tower desktop computer might be different - those power supplies usually have a connection between the mains earth and the case of the PC....but I am not sure whether this will extend to the USB shield, I will check mine when I can.

Your solution might be to just switch your power supply off rather than unplugging it.  Of course you should also check if the power supply ground goes all the way through to the output.

The best solution would be to get a mains cable with a proper 3-pin plug,  cut the IEC end off (preferably while it is NOT plugged in :-), strip it back a bit, and cut off and insulate the white and black wires (which is what I think you have in the US) leaving the green earth wire only - and connect that to your anti-static mat.  This does assume you have a spare power outlet where you are working, and that G the G does not want to use said outlet while you are electronicking...

PS to avoid the white and black wires shorting, cut them off different lengths.  Then get some pliers and pull the insulation so you don't have wire ends sticking out.  Then insulate them with tape.   As the Irish would say....To be sure...to be sure...

Max The Magnificent
User Rank
Blogger
Re: Braided shield
Max The Magnificent   8/13/2014 5:41:37 PM
NO RATINGS
@MeasurementBlues: Congratulations Max, you've just created a pigtail, a wonderful source of radiated emissions.

Thank-you-very-much ... I'll be playing here all week :-)

MeasurementBlues
User Rank
Blogger
Google has found you
MeasurementBlues   8/13/2014 5:36:17 PM
NO RATINGS
@Max, I get a Google alert for "electrostatic discharge" and you've been picked up.

<<   <   Page 7 / 10   >   >>
Radio
NEXT UPCOMING BROADCAST
EE Times Senior Technical Editor Martin Rowe will interview EMC engineer Kenneth Wyatt.
Top Comments of the Week
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Times on Twitter
EE Times Twitter Feed
Flash Poll