Breaking News
Engineering Investigations

Frankenstein's Fix: No Smoking in the Emergency Room

NO RATINGS
View Comments: Threaded | Newest First | Oldest First
Caleb Kraft
User Rank
Blogger
great story
Caleb Kraft   9/2/2013 8:47:15 AM
NO RATINGS
This is a fantastic story George! It is always surprising to hear about some of the oversights that happen out there, especially in the medical industry. You'd think there would be some kind of additional level of scrutiny, but I guess theres not. It isn't going into space after all.

kfield
User Rank
Blogger
Re: great story
kfield   9/2/2013 1:55:47 PM
NO RATINGS
I love the fact that you say that your idea was "just good enough to work." I think that's one area that all engineers can never get enough experience, which is "Determining when good is good enough!" Quite a trial by fire for a new engineer!

Sheetal.Pandey
User Rank
Manager
Re: great story
Sheetal.Pandey   9/2/2013 3:21:40 PM
NO RATINGS
Nice story. Sometimes there are some of these design flaws that somehow escape unnoticed while design phase or reliability testing phase. I remember some of nokia phones bursted or produced lot of interference when in gas stations or phone kept on charging and at the same time talking on the call.

Max The Magnificent
User Rank
Blogger
Re: great story
Max The Magnificent   9/3/2013 1:12:43 PM
NO RATINGS
@kfield: I think that's one area that all engineers can never get enough experience, which is "Determining when good is good enough!"


That' sone of my problems -- I cannot stop myself from over-engineering somethinginstead of stopping with something that actually does the job that was originally required.

WKetel
User Rank
Rookie
Re: great story
WKetel   10/11/2013 7:31:17 PM
NO RATINGS
"How good is good enough" is a fair question, and for an answer, when designing production line equipmet for an auto company the specification is simple: "The system must not fail at any time under any condition". So it makes sense to go for a bit more than just good enough.

Most of the time the customers are able to understand that most of the time.

Taz trooper
User Rank
Rookie
Re: great story
Taz trooper   9/27/2013 3:45:07 AM
NO RATINGS
Taz's law of electronics:

Electronics are only unreliable where they hit the outside (real) world........

David Ashton
User Rank
Blogger
Great story.
David Ashton   9/2/2013 4:54:32 PM
NO RATINGS
Great story George.  I used to maintain a fleet of big old CRT terminals, with analogue power supplies, and power supply connectors were my # 1 problem.  The board connectors just had a circular pin, a blade pin as in the old AT power supplies w=is a much better idea,  

And a good fix too, glad you got some recognition for it!

kfield
User Rank
Blogger
Re: Great story.
kfield   9/3/2013 8:09:03 AM
NO RATINGS
@Dashton Wow David, maintaining a big fleet of "CRT terminals" almost sounds DIckensian today!!! 

Caleb Kraft
User Rank
Blogger
Re: Great story.
Caleb Kraft   9/3/2013 10:51:44 AM
NO RATINGS
I can imagine my kids faces now... "you used TUBES? and those tubes shot electrons at your faces?"

Max The Magnificent
User Rank
Blogger
Re: Great story.
Max The Magnificent   9/3/2013 1:14:34 PM
NO RATINGS
@Caleb: I can imagine my kids faces now... "you used TUBES?


I don;t think my son or his friends woudl recognize a vacuum tube if they saw one ... sad, because seeing the glow of a tube radio gives one a warm and fuzzy feeling.

kfield
User Rank
Blogger
Re: Great story.
kfield   9/3/2013 1:26:14 PM
NO RATINGS
@Max the magnificent:  Knowing David, I can't imagine he would do any job without the adjective "big" in it. And he certainly did not say that it was a small, measely fleet now did he?

Max The Magnificent
User Rank
Blogger
Re: Great story.
Max The Magnificent   9/3/2013 1:33:10 PM
NO RATINGS
@kfield: ...he certainly did not say that it was a small, measely fleet now did he?


He was probably embarrassed to say ... I'm sure that if it had been an awesomely, formidably, resplendently large fleet, then he would have managed to work it into the conversation somehow LOL

Max The Magnificent
User Rank
Blogger
Re: Great story.
Max The Magnificent   9/3/2013 1:34:08 PM
NO RATINGS
@kfield: Knowing David, I can't imagine he would do any job without the adjective "big" in it.

Now you've brought a flush to his cheeks...

... (and his face has gone red as well :-)

Max The Magnificent
User Rank
Blogger
Re: Great story.
Max The Magnificent   9/3/2013 1:08:43 PM
NO RATINGS
@kfield: Wow David, maintaining a big fleet of "CRT terminals" almost sounds Dickensian today!!!


What makes you think it was a "big fleet"? (Are you projecting again?) What David actually said was that he used to maintain "a fleet of big old CRT terminals" -- which leaves us none the wiser as to whether it was a small, medium, or large fleet.

I'm sorry -- I can't help it -- I am an anal retentive engineer LOL


PS It's not the size of one's fleet -- it's what one does with it that counts :-)

David Ashton
User Rank
Blogger
Re: Great story.
David Ashton   9/3/2013 4:39:43 PM
NO RATINGS
@Karen, Max....I said "a fleet of BIG old CRT terminals"....note the position of the word BIG....the terminals were big, not the fleet......    were you as fleet of mind as you are of wit, you would have noticed this :-)

rick merritt
User Rank
Blogger
Re: Great story.
rick merritt   9/3/2013 4:55:18 PM
NO RATINGS
Funny!

bobdvb
User Rank
Manager
Re: Great story.
bobdvb   10/9/2013 9:36:56 AM
NO RATINGS
When I was back in college we were donated what is now an antique video graphics machine called a "Harry"

In 1985, Quantel released the "Harry" effects compositing system/non-linear editor. The Harry was designed to render special effects in non-real time to the video recorded on its built-in hard disk array (much like most computer based non-linear editing systems today). The hard disk array used drives made by Fujitsu, and were connected to the Harry using a proprietary parallel interface, much like a modern-day RAID array. Technically, it was the first all-digital non-linear editing system, since it could also do editing of the video that was recorded on the Harry. Due to technical constraints of the time, the Harry could only record 80 seconds of video, albeit encoded in full broadcast-quality, uncompressed D1-style 8-bit CCIR 601 format. This aside, the Harry was quite an advanced machine, and the only system like it for its time.

When we were fitting it not only were the HDDs a three man lift each, but the mainframe had a PSU which mated to it with 3/4in copper rods for the DC. It looked like some giant Swiss mains connector. Along with the Klystron PSUs that I used to handle I have to declare that I am a wimp when it comes to HT and high current, I stay away.

 

JanineLove
User Rank
Blogger
TIme to Think
JanineLove   9/4/2013 9:44:18 AM
NO RATINGS
Great story George! You have a real knack for humorous writing.  I love the line: "When a boiler explosion starts sounding like a good thing, you know you're in a pretty dark place." But seriously, you do raise a good point. Thanks to taking your dog for a walk, you thought of a solution. I think one of the fundamental problems of our work culture today is that we are constantly needing to be more "productive" and have no TIME to think of the good ideas. Or even the mediocre ideas that might lead to good ones...

LiketoBike
User Rank
CEO
Re: TIme to Think
LiketoBike   9/6/2013 4:29:54 PM
@Janine, you are absolutely right.  Never any time to think.  Never any time to do it right the first time, but always time to do it over...  Thinking always pays off!

As an RF power guy, connectors and packaging are almost always my biggest headaches.  They cost too much, they take up too much room, they don't have enough current capacity, they break...etc, etc, etc.  Mundane, boring, unsexy areas like this are where advances could have a real impact.  Given time :-)

Susan Rambo
User Rank
Blogger
Thanks
Susan Rambo   9/4/2013 12:03:03 PM
NO RATINGS
Thanks for the entertaining story. Dr. Frankenstein would be proud.

Charles.Desassure
User Rank
Manager
The past...
Charles.Desassure   9/4/2013 8:24:31 PM
NO RATINGS
Thanks for your post.  Sound like you really enjoyed that job.  Thanks for sharing.

WKetel
User Rank
Rookie
Hot smoking connectors and the simple solution
WKetel   9/7/2013 7:00:16 PM
NO RATINGS
This interesting story certainly is quite entertaining, no doubt. But what I would like would be more of an explanation as to just how the fix fixed the product and was able to have the product still providing the functions that the customers expected it to do. So what we have is a great setup for the story and then a very short description of the wonderful fix that somehow saves the day. A better description of how that fix kept the thing going would be quite in order.

grg9999
User Rank
Blogger
Re: Hot smoking connectors and the simple solution
grg9999   10/11/2013 8:54:06 AM
NO RATINGS
I held back from a more descriptive explanation as this circuit is currently going through the patent process and the panel of patent attorneys would probably frown on a public description at this time.  

 

Basically it checks both the voltage and currents, in this case checking one is not definitive enough, then it shuts things down if things look askew.  And it periodically tries a restart just in case the fault condition goes away.  Ret is hush-hush for now.

Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Times on Twitter
EE Times Twitter Feed
Top Comments of the Week