Breaking News
Engineer’s Bookshelf

SPICE Made Easy

NO RATINGS
5 saves
View Comments: Oldest First | Newest First | Threaded View
Page 1 / 3   >   >>
Doctek
User Rank
Rookie
LT Spice Tutorial
Doctek   9/5/2013 8:35:11 PM
NO RATINGS
Google for some excellent and free tutorial material on LTSpice. 

I'm sure the Wurth book is great, but $50 is a lot for the hobbyist or student when there are many excellent treatments available free.

Kenneth Wyatt
User Rank
Blogger
Re: LT Spice Tutorial
Kenneth Wyatt   9/6/2013 11:44:39 AM
NO RATINGS
You're right, of course. But some will find it handy to have everything needed in one place.

Here are a few links to tutorials and other LTspice references:

The Yahoo LTspice group has nearly 45,000 members and is very active - http:tech.groups.yahoo.com/group/LTspice. You'll need a Yahoo email address and will have to go through the "joining" process.

A good reference and tutorial site is the LTwiki site - http://ltwiki.org

Linear Technology applications engineer, Steve Knudtsen, has a very nice tutorial slide set given to the Denver Power Electronics chapter of the IEEE in 2009 - http://www.denverpels.org/Downloads/Denver_PELS_20090519_Knudtsen_LTSpice_Intro.pdf

Dr. Tony Richardson, of the University of Evansville, has a collection of tutorials for LTspice - http://csserver.evansville.edu/~richardson/courses/Tutorials/LTspiceIV/index.html

 

zeeglen
User Rank
Blogger
Re: LT Spice Tutorial
zeeglen   9/6/2013 11:57:02 AM
NO RATINGS
Good info, can use good sources of LTspice tutorials. A word of caution on the yahoo group, while most are helpful, one of the members is known to be very aggressively disparaging towards newbies.

Sanjib.A
User Rank
CEO
Knowing more on how to get "true" FFT
Sanjib.A   9/7/2013 3:35:34 AM
NO RATINGS
I have an unexplored area in LTSpice, I have seen a significant different between the FFT responses (for the waveforms generated for the same circuit parameters) for different settings of "Stop Time" and "Minimum Time step" in the "Edit Simulation Command" window. I just briefly went through the table of contents of the book (thanks for the link) and see that there is a chapter10 and sections 10.11.1, 2, 3 describes this. But rest of the book is not that interesting to me as it looks more like a manual to me. Does anyone have any article explaining what should be the optimum settings to get a more real FFT picture? Also, is there not an e-book version released? 

Raymond.Rogers_#1
User Rank
Rookie
Re: LT Spice Tutorial
Raymond.Rogers_#1   9/7/2013 11:17:18 AM
NO RATINGS
Doctek:  Your not wrong but how much is it worth to have information in an organized familiar form; readily available?

If your retired, student, or short of money $50 is not worth it because you have no way to get a ROI.

But if you are being paid $50/hour then it doesn't take long to recover a $50 investment either as a contractor or employe.

You have to remember that details fade if you don't use them.  I have had very experienced and high paid engineers ask me technical questions about particular spice models.  No shame in that since all memory is fallable; either due to time, distraction, or (when you are older) displacement in the memory space :)

How much is the saved time worth?

Kenneth Wyatt
User Rank
Blogger
Re: Knowing more on how to get "true" FFT
Kenneth Wyatt   9/7/2013 2:17:34 PM
NO RATINGS
Stop Time (T) is the duration of the transient simulation. For a fixed Maximum Time Step of, say, 0.01 ms, the value of T has a significant influence on the appearance of the FFT spectrum as well as on the precision of the harmonics minimum amplitude.

The Time Step parameter (delta T) is the interval between two transient measurements. If the value Stop Time remains fixed and equal to T =10 sec and if the number of samples is decreased by not being as demanding with the maximum value of Time Step, the frequency resolution is reduced and provides fewer details in the low frequencies.

Therefore, you have to consider both parameters for the FFT analysis to be close to reality. Finally, there are 12 models of sampling window within LTspice. For example, the Flat Top window will provide very precise harmonic amplitudes, but very bad frequency resolution, while the Hamming window will provide acceptable amplitude accuracy and very good frequency resolution. The Kaiser-Bessel window will provide more precise amplitudes and resolution, but is still limited for both. The others have similar kinds of tradeoffs. No window is perfect.

To my knowledge, there is no electronic copy available for this book.

analogspiceman
User Rank
Rookie
Re: LTspice Tutorial
analogspiceman   9/7/2013 9:21:46 PM
NO RATINGS
zeeglenn wrote:
A word of caution on the yahoo group, while most are helpful, one of the members is known to be very aggressively disparaging towards newbies.

Hey, I resemble that remark!  (Which I will address shortly.)

But first, to Ken Wyatt and anyone else reading this, the correct spelling of LTspice is as a single word with the "LT" part in upper case and the "spice" part in lower case.

As far as the Yahoo LTspice group goes, the rule of thumb is no question, no matter how simple or basic, will be mocked as long as it has been prepared with at least as much effort in the asking as is expected in the answering.  If there is an exception, it would be students trying to trick experienced group members into directly answering homework problems. Such behavior is cheating (whereas just getting help with basic understanding or where specifically "stuck" is perfectly fine).

Asking questions that are clearly and directly answered in LTspice Help or in yesterday's messages is sure way to bring on a public shaming for being too lazy to do any research and for inconsiderately cluttering the group with needless drivel.  Also, you wouldn't believe how some people can ask vague questions with little or no background information and either don't upload a simulation file at all or fail to include all the necessary parts to make it run: "LTspice couldn't simulate my 5 volt buck converter.  It just stops with an error message.  How can I get LTspice to work right?"

What are these people thinking?

 

Sanjib.A
User Rank
CEO
Re: Knowing more on how to get "true" FFT
Sanjib.A   9/8/2013 4:34:30 AM
NO RATINGS
Ken, Thanks a lot for the information regarding the importance of selecting the proper sampling window in the FFT view menu. Are those algorithms elaborated in the book from WE?

Also, selecting a delta T (simulation step size) as minimum as possible would give results closer to reality, right? (though it would take more simulation time with reducing delta T keeing stop time the same). 

Kenneth Wyatt
User Rank
Blogger
Re: Knowing more on how to get "true" FFT
Kenneth Wyatt   9/8/2013 9:42:57 AM
NO RATINGS
analogspiceman, thanks for the proper spelling. The book title is in all caps and I've always seen "spice" always in caps (aside form the "LT" version). Thanks, also, for further explaining the proper etiquette in using the yahoo group.

Sanjib, the book has several figures illustrating the concept, but otherwise, doesn't go into much more detail in that regard. However, there's a lot more general info and tips on using FFT in the other sections you noted.

Yes, using smaller delta T's will give more accurate results, but at the expense of longer simulation times.

Kenneth Wyatt
User Rank
Blogger
LTspice and Mac OSX!
Kenneth Wyatt   9/8/2013 9:58:20 AM
NO RATINGS
Wow - I just now noticed there is a version of LTspice for the Mac! Happy days!

See the link here: http://www.linear.com/designtools/software/#LTspice

It does require OSX 10.7, or higher.

Page 1 / 3   >   >>
Flash Poll
Radio
LATEST ARCHIVED BROADCAST
EE Times editor Junko Yoshida grills two executives --Rick Walker, senior product marketing manager for IoT and home automation for CSR, and Jim Reich, CTO and co-founder at Palatehome.
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Times on Twitter
EE Times Twitter Feed
Top Comments of the Week