Breaking News
Blog

London Calling: FDSOI clocks at 3GHz

NO RATINGS
View Comments: Oldest First | Newest First | Threaded View
michigan0
User Rank
Manager
re: London Calling: FDSOI clocks at 3GHz
michigan0   2/21/2013 1:21:07 AM
NO RATINGS
IBM invented PDSOI, FDSOI, and E (extremely)T (thin) SOI technologies over twenty years of time period. PDSOI was very successful products. IBM and its SOI Consortium have spent enormous resources and efforts for volume manufacture of FDSOI and ETSOI including UTBB, but have not been successful. No FDSOI is manufactured at any node even today or the 22nm era. The major reason is for the 28 node a 7nm and for 22nm node 5.5nm extremely thin channel ETSOI are required to suppress the transistor leakage current or short channel effects. However, such ultra-thin 7nm and 5.5 nm ETSOI canít be manufactured by Soitec. What Soitec can deliver today is 28nm SOI wafers with minimum channel thickness of 12nm and 25nm buried oxide. Therefore, STMís repeated claims to have advantages over planar bulk CMOS and FinFETs in performance, power consumption and manufacturability are not justified because the 28nm planar bulk is in high volume manufacturing over 3 years and Intelís FinFETs are also in high volume manufacturing for almost 2 years, but STMís FDSOI is not manufactured yet and not likely. STMís 28nm wafer process sounds like etching back 5nm silicon from the 12nm silicon film to obtain a final 7nm. My question is such an extremely thin 5nm silicon can be etched back to obtain a final 7nm uniformly and reliably across the 300mm wafer in volume manufacturing. It sounds like a test chip or test wafer process. The published 7nm and 6nm data is test chip or test wafer data. STM claims it is qualified for production.

AKH0
User Rank
Freelancer
re: London Calling: FDSOI clocks at 3GHz
AKH0   2/22/2013 2:10:33 AM
NO RATINGS
SOITEC provides 12nm wafers because they are asked to. It's not that they are limited to 12nm and manufacturers have to take the extra burden of thinning the wafer to the desired thickness. You need a few nm as a part of STI formation (so-called padox) and a few nm for thick oxide devices and HK gate pre-clean. All these steps are precise oxidation steps that have been used in in the industry for many years to form the gate oxide (which has been by far the most uniform process step in ic manufacturing).

Most Recent Comments
seaEE
 
Neo10
 
collin0
 
zeeglen
 
Francene
 
MeasurementBlues
 
zeeglen
 
MeasurementBlues
 
SteveP67
Top Comments of the Week
August Cartoon Caption Winner!
August Cartoon Caption Winner!
"All the King's horses and all the KIng's men gave up on Humpty, so they handed the problem off to Engineering."
5 comments
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Times on Twitter
EE Times Twitter Feed
Radio
LATEST ARCHIVED BROADCAST
David Patterson, known for his pioneering research that led to RAID, clusters and more, is part of a team at UC Berkeley that recently made its RISC-V processor architecture an open source hardware offering. We talk with Patterson and one of his colleagues behind the effort about the opportunities they see, what new kinds of designs they hope to enable and what it means for todayís commercial processor giants such as Intel, ARM and Imagination Technologies.
Flash Poll