Breaking News
Modifying a Playstation Controller for Muscular Dystrophy, Part 1: The Dissection
8/29/2013

< Previous   Image 6 of 6   

< Previous   Image 6 of 6   

Return to Article

View Comments: Newest First | Oldest First | Threaded View
<<   <   Page 2 / 2
Colecago
User Rank
Author
Good Luck
Colecago   8/29/2013 11:14:17 PM
NO RATINGS
I hope you fare better than I did.  I tried to help on a PS3 controller modification (tying into the lines) and because all of the buttons are analog and connected to a flex circuit which is just pressed onto the board (no connector) it was absolutely miserable.  We tried soldering to the pads on the board, then it made a finicky connection instead, I tried attaching a wire to the flex circuit thinking that it was copper like similar circuits, and the ink came off, it was just terrible.

My suggestion, get a PS3 compatible USB controller and hack that, all digital, you can move switches around, hopefully no nasty sony flex board in it, etc.

rick merritt
User Rank
Author
Re: idea....i hope :)
rick merritt   8/29/2013 7:47:28 PM
NO RATINGS
Nice work, Caleb. Can't imagine where you find that "free time" stuff to be able to do this, but glad you can!

Caleb Kraft
User Rank
Author
Re: idea....i hope :)
Caleb Kraft   8/29/2013 5:07:54 PM
NO RATINGS
I've got one of those here to play with. I should compare the outputs to see how similar they are. That might be my best solution.

Caleb Kraft
User Rank
Author
Re: idea....i hope :)
Caleb Kraft   8/29/2013 5:07:05 PM
NO RATINGS
That would be a much better layout I think. I'm a bit concernd about attempting to extend this flexible material though. I'm not sure how well I could connect to it, or how long those connections would last.

dangerbock
User Rank
Author
Re: idea....i hope :)
dangerbock   8/29/2013 1:26:10 PM
NO RATINGS
Another idea is to use force sensing resistors insted of the force sensetive buttons.
that way he would not neet much force

example:
http://www.inmotion.pt/store/.5-%281.27cm%29-force-sensing-resistor

dangerbock
User Rank
Author
idea....i hope :)
dangerbock   8/29/2013 1:23:20 PM
NO RATINGS
i think that way will be dificult to reach the buttons
would be great to have them near the cursor and on the other side near triangle, etc..

take a look at this image:

http://www.flickr.com/photos/dangerbock/9624347634/

i never open my controllers so i don't know if is possible to put a pressure button there


<<   <   Page 2 / 2
Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed