Breaking News
Blog

Taking Bored Out of Board Meetings

NO RATINGS
View Comments: Newest First | Oldest First | Threaded View
Michel Courtoy
User Rank
Author
Re: Virtual Board Meeting
Michel Courtoy   5/27/2014 5:55:07 PM
NO RATINGS
Barun - Your situation is indeed not unusual and getting more common.  In fact, 4:00am Board meetings are a regular occurence for me.  In general, my recommendations outlined in the blog still apply: preparation (i.e. materials sent in advance) and logisitics should be well tuned.  When dealing with cross continent and cross cultural relationships in Board, it is critical to emphasize communications beyond the boundaries of Board meetings.  This could reaching out on a regular basis over the phone to the distant Board member.  I would also advise taking advantage of business travel to visit the 'remote' Board members.

Good luck.

Michel

barunkd
User Rank
Author
Virtual Board Meeting
barunkd   5/26/2014 8:40:54 AM
NO RATINGS
Hi Michel,

It is a really nice insight about having a meaningful board meeting, but the tips are relevant for face to face board meeting. It will be really helpful if you can provide some insight on how to conduct a virtual board meetings. This will be very relevant for the companies (like those in India) where CEO and board members are far located and face to face board meeting is not possible due to cost

Regards,

Barun

 

Michel Courtoy
User Rank
Author
Re: a good series
Michel Courtoy   4/29/2014 1:59:38 PM
NO RATINGS
You are welcome, Susan.  It is a privilege to be able to share this information through EETimes. Thanks.

Susan Rambo
User Rank
Author
a good series
Susan Rambo   4/29/2014 12:45:26 AM
NO RATINGS
Thanks for this series on business 101 for startups. It's likely many readers will start their own company, considering how inventive engineers are, so it's helpful to learn some basics plus get the lowdown

More Blogs
Winning products can have viable production lifetimes of decades, despite our "here today, obsolete tomorrow" thinking.
Customized displays don't need to be a complicated and expensive choice for designers and procurement professionals.
This quiz will make you think even more about how and when to use decoupling capacitors in high-speed circuits.
You'd think that the dissonance between excitement over IoT opportunities on one hand and concern about IoT security on the other would yield a rich breeding ground for companies targeting IoT security.
What do all the latest M&A events in the chip industry mean to semiconductor IP companies?
Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed