Breaking News
View Comments: Oldest First | Newest First | Threaded View
Page 1 / 5   >   >>
Sanjib.A
User Rank
CEO
Cheaper than TI's launchpad!
Sanjib.A   6/9/2014 12:50:23 PM
NO RATINGS
So, this one might be the cheapest development kit available in the market? I would really appreciate TI, the company which started this trend of making cute little development kits available at lower price. I still have a MSP430 kit having shape and size of a USB thumb drive which had a price tag of $20. I got that one 3/4 years back from a conference for free. The launchpad costed $5. I think, these kits are still among favourites for engineers.Why these boards did not gain enough publicity as Raspberry Pi, Arduino?...may be because of the lack of a bigger or rather a broader community of users, forums? ...and the absence of a pool of available resources, those are easily available for Arduino, Raspberry Pi?

Max The Magnificent
User Rank
Blogger
Re: Cheaper than TI's launchpad!
Max The Magnificent   6/9/2014 12:55:13 PM
NO RATINGS
@Sanjib: Why these boards did not gain enough publicity as Raspberry Pi, Arduino?...may be because of the lack of a bigger community of users, forums?

It's hard to say why some things take off and others not-so-much -- I'm sure that the Arduino was slow-going at first.

TonyTib
User Rank
CEO
Re: Cheaper than TI's launchpad!
TonyTib   6/9/2014 1:55:51 PM
NO RATINGS
The TI Launchpads do have a decent (thought not Arduino) sized community, for exmaple, check out 43oh.com and the Energia IDE.

There are a number of other cheap 32-bit dev boards, such as the TI Tiva LaunchPads ($13 & $20) and ST's Nucleo boards (~$10), although right now I can't think of any others for <$5.

 

betajet
User Rank
CEO
Please don't ask me about sports :-)
betajet   6/9/2014 2:46:19 PM
NO RATINGS
The NXP LPCXpresso boards -- which have been around for a number of years -- have that sort of snap-off layout, i.e., a USB-based debugger on the left and a demo MCU on the right with DIP layout for the signals.  However, the LPCXpresso board I have isn't set up for "snap off" -- I'd have to "saw off" with my fine-toothed razor saw.

The LPCXpresso boards are priced in the US$20-30 range depending on which demo MCU is on the DIP side.  Usually it's a tiny ARM M0/M0+ like an LPC1100 or LPC800.  What drives up the price is that the USB debug SoC is an LPC3154, a serious CPU with 180 MHz ARM926EJ-S, 192KB SRAM, 16KB instruction and data caches, and MMU.  Way overkill compared to the tiny USB controller on the Cypress boards.

Interesting note on the LPC3154: it doesn't have any on-board flash memory, so LPCXpresso has to boot up over USB each time you plug it in.

Wnderer
User Rank
CEO
That is cheap
Wnderer   6/9/2014 3:01:37 PM
NO RATINGS
That is cheap considering that the USB-Serial bridge on the little board $2.60 for the one piece price and the 4100 processor is $3 and the 4200 processor is $3:40.

barfoo0
User Rank
Rookie
Re: Cheaper than TI's launchpad!
barfoo0   6/9/2014 3:52:06 PM
NO RATINGS
They are charging $7.50 to ship in US. So real cost of part is $8.

Max The Magnificent
User Rank
Blogger
Re: Cheaper than TI's launchpad!
Max The Magnificent   6/9/2014 4:02:03 PM
NO RATINGS
@barfoo0: They are charging $7.50 to ship in US. So real cost of part is $8

I hadn't thought about the postage (shipping and handling) -- although that would apply to other boards also -- but if they are changing $7.40 to ship, then wouldn't the full price be $4 + $7:50 = $11.50?  (Where did you get $8 from)

betajet
User Rank
CEO
Re: Cheaper than TI's launchpad!
betajet   6/9/2014 4:13:46 PM
NO RATINGS
barfoo0 wrote: They are charging $7.50 to ship in US.

Try Digi-Key.  They quote me $3.22 for USPS First Class, and only charge $3.99 :-) plus sales tax for the board.

barfoo0
User Rank
Rookie
Re: Cheaper than TI's launchpad!
barfoo0   6/9/2014 4:16:13 PM
NO RATINGS
I was estimating that the actual shipping cost would be on the order of $3.50 via US post given the smallness of the board.

Max The Magnificent
User Rank
Blogger
Re: Cheaper than TI's launchpad!
Max The Magnificent   6/9/2014 4:20:20 PM
NO RATINGS
@barfoo0: I was estimating that the actual shipping cost would be on the order of $3.50...

Ah -- I see -- I misunderstood -- sorry

Page 1 / 5   >   >>
August Cartoon Caption Winner!
August Cartoon Caption Winner!
"All the King's horses and all the KIng's men gave up on Humpty, so they handed the problem off to Engineering."
5 comments
Top Comments of the Week
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Times on Twitter
EE Times Twitter Feed
Flash Poll
Radio
LATEST ARCHIVED BROADCAST
David Patterson, known for his pioneering research that led to RAID, clusters and more, is part of a team at UC Berkeley that recently made its RISC-V processor architecture an open source hardware offering. We talk with Patterson and one of his colleagues behind the effort about the opportunities they see, what new kinds of designs they hope to enable and what it means for today’s commercial processor giants such as Intel, ARM and Imagination Technologies.