Design Article
Comment
anne-francoise.pele
A video is available here: http://www.youtube.com/watch?v=NnmHZXvJhlk
iniewski
Pretty cool technology...Dr. Omenetto: would you be interested in giving a talk ...
Dissolving ICs could be used as medical implants
Dylan McGrath
9/28/2012 1:29 PM EDT
SAN FRANCISCO—Researchers from Tufts University and the University of Illinois at Urbana-Champaign (UIUC) say they have created tiny, biocompatible semiconductors that dissolve harmlessly into their surroundings after functioning for a precise amount of time.
The silk-silicon devices, called "transient electronics," could be used as medical implants that never need surgical removal, as well as environmental monitors and consumer electronics that can become compost rather than trash, according to the researchers.
[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]
The futuristic devices incorporate silicon and magnesium—key components of conventional integrated circuits—in an ultrathin form that is then encapsulated in silk protein.
"Transient electronics offer robust performance comparable to current devices but they will fully resorb into their environment at a prescribed time—ranging from minutes to years, depending on the application," said Fiorenzo Omenetto, a professor of biomedical engineering at Tufts School of Engineering. "Imagine the environmental benefits if cell phones, for example, could just dissolve instead of languishing in landfills for years."
Omenetto is among the authors of a paper on the subject, titled, "A Physically Transient Form of Silicon Electronics," published in the Sept. 28 issue of the journal Science.
"While silicon may appear to be impermeable, eventually it dissolves in water," Omenetto said. The challenge is to make the electrical components dissolve in minutes rather than eons, he said.
The transient electronic circuits are only a few tens of nanometers thick, from transistors to interconnects, and readily dissolve in a small amount of water or body fluid and are harmlessly reabsorbed, according to the researchers. Controlling materials at these scales makes it possible to fine-tune how long it takes the devices to dissolve, they say.
The researchers successfully demonstrated the new platform by testing a thermal device designed to monitor and prevent post-surgical infection (demonstrated in a rat model) and also created a 64 pixel digital camera.
Device dissolution is controlled by sheets of silk protein in which the electronics are supported and encapsulated. Silk protein—extracted from silkworm cocoons— is among the strongest, most robust materials known. It's also fully biodegradable and biofriendly and is already used for some medical applications.
Omenetto and his Tufts colleagues say they have discovered how to adjust the properties of silk so that it degrades at a wide range of intervals.
In the future, the researchers envision more complex devices that could be adjustable in real time or responsive to changes in their environment, such as chemistry, light or pressure.
Related stories:
The silk-silicon devices, called "transient electronics," could be used as medical implants that never need surgical removal, as well as environmental monitors and consumer electronics that can become compost rather than trash, according to the researchers.
[Get a 10% discount on ARM TechCon 2012 conference passes by using promo code EDIT. Click here to learn about the show and register.]
The futuristic devices incorporate silicon and magnesium—key components of conventional integrated circuits—in an ultrathin form that is then encapsulated in silk protein.
"Transient electronics offer robust performance comparable to current devices but they will fully resorb into their environment at a prescribed time—ranging from minutes to years, depending on the application," said Fiorenzo Omenetto, a professor of biomedical engineering at Tufts School of Engineering. "Imagine the environmental benefits if cell phones, for example, could just dissolve instead of languishing in landfills for years."
Omenetto is among the authors of a paper on the subject, titled, "A Physically Transient Form of Silicon Electronics," published in the Sept. 28 issue of the journal Science."While silicon may appear to be impermeable, eventually it dissolves in water," Omenetto said. The challenge is to make the electrical components dissolve in minutes rather than eons, he said.
The transient electronic circuits are only a few tens of nanometers thick, from transistors to interconnects, and readily dissolve in a small amount of water or body fluid and are harmlessly reabsorbed, according to the researchers. Controlling materials at these scales makes it possible to fine-tune how long it takes the devices to dissolve, they say.
The researchers successfully demonstrated the new platform by testing a thermal device designed to monitor and prevent post-surgical infection (demonstrated in a rat model) and also created a 64 pixel digital camera.
Device dissolution is controlled by sheets of silk protein in which the electronics are supported and encapsulated. Silk protein—extracted from silkworm cocoons— is among the strongest, most robust materials known. It's also fully biodegradable and biofriendly and is already used for some medical applications.
Omenetto and his Tufts colleagues say they have discovered how to adjust the properties of silk so that it degrades at a wide range of intervals.
In the future, the researchers envision more complex devices that could be adjustable in real time or responsive to changes in their environment, such as chemistry, light or pressure.
Related stories:
- Researchers set up decentralized smart grid
- Researchers grow semiconductors on graphene
- Researchers propose approach to cut design validation time
- High-tech implants resist infection
- Moving implant, body nets advance at ISSCC
|
|
|
|
|
Navigate to related information
goafrit
9/28/2012 5:24 PM EDT
This has been in the labs for ages. When will they get this to the market?
Sign in to Reply
docdivakar
10/1/2012 1:26 PM EDT
I like the environmental monitoring aspect of this technology and it has many practical uses like reading soil's nitrogen content, salinity, dissolved oxygen content in lakes & rivers, etc.
MP Divakar
Sign in to Reply
iniewski
10/1/2012 1:39 PM EDT
Pretty cool technology...Dr. Omenetto: would you be interested in giving a talk at emerging technologies symposium in Whistler in 2013? www.cmoset.com, kris.iniewski@gmail.com
Sign in to Reply
anne-francoise.pele
10/3/2012 12:16 PM EDT
A video is available here: http://www.youtube.com/watch?v=NnmHZXvJhlk
Sign in to Reply