FREMONT, Calif. -- Logitech Inc.'s recently announced upgrade strategy for its QuickCam Express digital camera line has pulled CMOS pixel sensor technology one step closer to the mainstream commercial market. The company will be replacing charge-coupled device (CCD) sensors in the cameras with a 352-x-288-pixel CMOS image sensor from Photobit Inc.
Photobit, based in Pasadena, Calif., was formed by engineers from the Jet Propulsion Laboratory, which had developed the sensor technology for spacecraft. Only a few years ago, CMOS "active-pixel" technology was still in the research stage. Photobit began marketing CMOS image sensors based on the technology last year, and now has four products.
In addition to the QuickCam sensor, Photobit also offers a VGA-format 640-x-480-pixel sensor, a high-definition television format chip and a high-speed 500-frames-per-second megapixel video chip.
NASA was interested in the approach because the imaging chips consume much less power than CCDs, and since they are CMOS-compatible, it is possible to integrate image-processing circuitry to simplify camera design. Those advantages, along with lower cost, also have made the technology attractive to consumer product vendors. The new sensor, Photobit's PB-0100, will allow Logitech to enhance the performance of its QuickCam design, which captures video for low-bandwidth communications over phone lines and the Internet.
The imager is designed for small-format applications such as video cell phones or handheld scanners. The chip includes digital signal processing circuitry to enhance the performance of the sensor. The on-chip circuitry also converts the output directly into full-frame, 8-bit digital video at 39 frames per second.
The chip can also perform other imaging functions that usually require optical and mechanical subsystems. Through the use of a digital serial interface, for example, it can be programmed via digital signal processing for pan, tilt and zoom functions.