EPCOS has developed two new ferrite materials whose improved properties make them suitable for the power range typical of SMPS and current meters. N95 is distinguished by a high flux density of 525 mT at 25 °C and 410 mT at 100 °C. A special feature is its low power dissipation at 100 °C: it is only 250 kW/m3 at 500 kHz and a flux density of 50 mT. It has an optimum operating frequency range of between 25 kHz and 500 kHz. Typical applications of N95 are power transformers in SMPS. This material is available in the E, ER and ETD cores.
T36 is distinguished particularly by its high linearity and can thus be used in applications such as current meters. It has an initial permeability of 7000 and a flux density of 400 mT (25 °C). Typical operating frequencies are between 50 Hz and 100 kHz. It is available as a ring core.
Both materials may also be supplied in customized designs.
Further information on the products presented here will be found at www.epcos.com/ferrites
Please forward reader inquiries to:
Fax +49 89 firstname.lastname@example.org
Note: The above text is the public part of the press release obtained from the manufacturer (with minor modifications). EETimes Europe cannot be held responsible for the claims and statements made by the manufacturer. The text is intended as a supplement to the new product presentations in EETimes Europe magazine.