SAN JOSE, Calif. - In a major move, Maxim Integrated Products Inc. is entering into the emerging digital power market.
Maxim has rolled out its first chips in the arena, based on the company's new InTune brand digital power technology. The technology is based on "state-space" or "model-predictive" control, as opposed to proportional-integral-derivative (PID) control used by competitors.
In addition to internal R&D efforts, the company also developed the technology through an acquisition. Last August, Maxim quietly acquired L&L, a small firm that was developing and licensing digital control technology based on ''state-space.'' To also help its efforts, Maxim also recently licensed so-called Digital Power Technology (DPT) patents from Power-One Inc.
Maxim is the latest vendor to jump in the digital power market. ADI, Intersil, Linear, Microchip, TI and others are also in the business. IMS Research estimates that while the digital power IC market accounts for less than 10 percent of the total market today, it is growing by an average of 30 percent per year and will amount to over $900 million by 2016.
"The digital power market has entered the mainstream adoption stage of customer acceptance," said Ryan Sanderson, an analyst at IMS. "Some OEMs report that they now have more than 40 different power supplies on a single PCB. It is no longer practical to rely solely on analog power techniques for these designs. Digital power simplifies design, reduces components, and provides flexibility.''
Digital power relies on a digital or discrete time controller for the control loop rather than the traditional analog approach. Digital power management provides OEMs with increased control, efficiency and performance. The early adoptors in digital power are OEMs in networking, telecom and storage, said Jim Templeton, director of business management at Maxim.
Maxim did not provide details of the chips, which are sampling to customers. The announcement mainly revolves around its InTune technology. Maxim ''is not the first'' company in digital power, Templeton told EE Times. So ''we need to be the best.'
Maxim's InTune digital power technology is said to perform an automatic compensation routine that is based on measured parameters, which enables the construction of an internal mathematical model of the power supply including the external components.
The result is a switching power supply that achieves the highest possible dynamic performance. Furthermore, this information enables several proprietary algorithms that optimize efficiency across a wide range of operating conditions. Maxim's InTune digital power technology requires up to 5x lower bias current than competing devices.
"Unlike competing technology, Maxim's InTune digital power technology is not an iterative tuning technique. It is deterministic and resolves several limitations present in today's digital power solutions," Templeton said. "Unlike PID-based solutions, the loop used by Maxim's InTune digital power technology provides seamless small- and large-signal response without the need to cross back and forth between linear and nonlinear modes. This enables loop response up to 10x faster than competitors and does not require any user-set thresholds. In fact, the PWM controllers used by Maxim's InTune digital power technology are even faster than their analog equivalents."
Meanwhile, Maxim has recently expanded its product efforts on other fronts. It recently announced the creation of highly-integrated power system-on-chip (Power SoC) devices. These new products integrate power management and mixed-signal functions such as digital audio, a high-speed interface, and a touch-screen controller on a single chip. This will enable high performance, as well as thinner and smaller form factors in smartphones, tablets, and e-readers, according to Maxim.
Separately, the company has also rolled out the MAX11855 and MAX11871 projected capacitive touch-screen controllers, offering 4-point and 10-point touch detection with industry-leading sensitivity and noise immunity performance.
It has also recently introduced the MAX44007/MAX44009 digital ambient-light sensor (ALS) ICs with an adaptive-gain block. Designed using the company's proprietary BiCMOS technology, these ICs integrate two optical sensors, an ADC, and digital functionality into a tiny 2-mm x 2-mm x 0.6-mm package.
The MAX44007/MAX44009 consume 100x less power than the nearest competitive product. They offer an interrupt function that constantly measures the amount of light and reports to the microcontroller when the measurement passes the threshold. This functionality extends power savings by reducing the frequency of I²C communications.
The MAX44007/MAX44009 are well suited for applications such as tablet and notebook PCs, smartphones, TVs, digital lighting-management systems, and light-intensity monitoring applications.
Recently, analog chip maker Maxim unveiled what it called ''the new Maxim’’ or ''Maxim 2.0.''Actually, ''Maxim 2.0,’’ the company’s business strategy, was set in motion back in 2000 and expanded in 2007. As part of the evolving and ongoing plan, the analog chip maker has remade the company-and shaken up the corporate culture.
The products look like a nice step forward for Maxim. I wonder if XOOM considered using the single chip (10 touch capable) Maxim capacitive touch-screen controllers? This might have been a better selection rather than the 4 chip set they used.
I didnt have chance to work on new maxim products however had some experiences with TI ones. Biasing was big pain i hope Maxim really solved that trouble. Furthermore having products with integrated power management and mixed-signal functions and a touch-screen controller on single chip simply marvelous idea. Since mobile era is here, i am sure they will have lots of customers. Should we consider Atmel is also working on such product?
Looks attractive, especially when it said the new part has faster response that the analog counterparts. As far as I know, whenever it comes to use ADC to sample the power supply and apply PID, the speed is surely limited and therefore the best class digital power supply is still falling away from the best class analog power supply. So, if MAXIM can really perform better (hope they are also comparing the best class analog competition), it surely is a good news to the market. However, 5x bias current may be a problem.
I tested few of the Maxim IC products.Their IC's are well made and gives results as per their specification or better. Entering into digital power market will increase the market share of them.We can see new innovative IC's from Maxim semiconductors
Join our online Radio Show on Friday 11th July starting at 2:00pm Eastern, when EETimes editor of all things fun and interesting, Max Maxfield, and embedded systems expert, Jack Ganssle, will debate as to just what is, and is not, and embedded system.