SAN JOSE, Calif. – Applied Micro Circuits Corp. announced a multiplexer for 100 Gbit/second networks supporting serial data rates up to 28 Gbit/second. The S28010 Gearbox is part of a wave of chips that aim to enable next-generation optical networks, and one of the first CMOS chips to support 28 Gbit/s signaling.
The S28010 is the first of a new family of high-speed optical networking chips AMCC plans. It translates a 10-lane, 10 Gbit/s CAUI electrical interface to four lanes operating at 25 Gbits/s, a data rate the latest CMOS silicon is just beginning to tackle for the first time.
The 40nm chip probably will see its first use in OTU-4 optical transport networks, but eventually could be used in data centers to carry 100G Ethernet, Fibre Channel or Infiniband traffic. The part is among the first devices to comply with both the IEEE 802.3ba standard for 40/100G Ethernet and CFP multi-source agreement for 40/100G modules.
Existing multiplexers that handle 28G serial data rates typically are made in BiCMOS or silicon germanium, require at least two chips consuming a total of up to 8W and cost about $1,000. The S42810 is a single chip that consumes less than 4W and will cost $750 when it samples in September.
The first generation of 100G optical networking chips generally used ten lanes running at 10G, but the parts were relatively large and power hungry. "Everyone believes four lanes of 25G is going to be where the future is, and in four or five years it will be mainstream," said Tim Warland, a product manager at AMCC.
The multiplexer sits on a CFP module and takes in 10G signals, typically from a network switch chip. It spits out four 25G channels and links to an optical module, sending data over distances up to 10 kilometers on a single-mode fibre.
The chips will be used in core routers for carrier networks or aggregation switches in large data centers, both interested in moving up to 100G data rates. AMCC has an early lead in the shift from the old Sonet standard to the newer Optical Transport Network (OTN) technology carriers are adopting.
The company claimed earlier this year it hit a milestone of enabling with its chips one million OTN ports to date. Volumes of the new CFP modules are ramping up to tens of thousands per month now and will hit a quarter million modules per month soon, said Warland.
Applied Micro has an estimated market share of 45 percent in OTN devices such as framers, mappers and physical-layer devices, according to market watchers at The Linley Group (Mountain View, Calif.).