SCOTTSDALE, Ariz.— Akustica Inc., the Bosch Group's consumer microphone company, recently unveiled a new family of high-definition (HD) micro-electro-mechanical-system (MEMS) microphones said to cater to a wide swath of consumer electronics applications
The HD MEMS mics, offered in both analog and digital versions, were described by Akustica (Pittsburg) at the MEMS Executive Congress here earlier this month. Target markets include ever segment of the consumer electronics market including smartphones, tablets, laptops and hybrid convertibles straddling the tablet/laptop fence.
"Wireless carriers are driving the need to build HD voice capabilities into new handsets," said Stefan Finkbeiner, CEO at Akustica. "Conversations over low-noise wideband audio channels can enhance the user experience, making you feel almost like you're there."
So far, 20 carriers have announced support for wideband audio, including Sprint in the U.S. Most of the other 220 carriers worldwide are following suit, many in 2013.
Akustica's new family of high-definition MEMS microphones have super-wide frequency response for crystal clear voice recognition and come in four varieties for every consumer electronics application.
HD audio channels are already widely used in audio conferencing devices and by voice-over-IP (VoIP) carriers. But with HD audio going global over conventional carrier voice channels, wideband capabilities will need to become standard equipment on future handsets.
"And for any electronic device, HD voice begins with the microphone," Finkbeiner said. "You need a wideband mic with very low noise for HD audio. And for effective noise canceling and beam steering in microphone arrays, you also need tightly matched sensitivities."
Akustica has tried to meet needs of all the different types of HD audio devices with a line of four different models: two analog mics for legacy designs, and two digital mics for next-generation handsets, tablets, laptops and convertibles. Whether designers choose analog or digital, each can also be ordered with either top- or bottom-port configurations.
All four models (analog/top, analog/bottom, digital/top, digital/bottom) are plug-compatible with existing MEMS microphone pin-outs, making them drop-in replacements for redesigning HD wideband voice capabilities into existing handset models.
All four MEMS mics provide a 63 dB signal-to-noise ratio and flat frequency response from 50-Hz to 14-kHz. Multiple microphone arrays are matched to within plus or minus 2-dB. Packages are 3-by-4 and 2.95-by-3.76 millimeters for digital and analog models, respectively.
David Patterson, known for his pioneering research that led to RAID, clusters and more, is part of a team at UC Berkeley that recently made its RISC-V processor architecture an open source hardware offering. We talk with Patterson and one of his colleagues behind the effort about the opportunities they see, what new kinds of designs they hope to enable and what it means for today’s commercial processor giants such as Intel, ARM and Imagination Technologies.