LONDON – Documents presented at the fully depleted silicon on insulator (FDSOI) workshop in San Francisco this week show that the FDSOI roadmap now omits a 20-nm and goes straight to 14-nm and then on to 10-nm.
A summary slide from Horacio Mendez, executive director of the SOI Consortium, showed the jump with the comment that 14-nm FDSOI would be offered at the same time as Intel's 14-nm FinFET and would show the same performance characteristics but realizable at much lower cost. A presentation by Joel Hartmann, executive vice president of front-end process for STMicroelectronics, at the same meeting, organized by the SOI Consortium, also shows the move from 28-nm FDSOI, a process that is has started to ship in the second-half of 2012, on to 14-nm FDSOI and then 10-nm FDSOI.
Previously ST has spoken of the 28-nm FDSOI process prototyping in July 2012 followed by a 20-nm FDSOI process prototyping in 3Q13.
The implication is that parties interested in the FDSOI roadmap are renaming what was the 20-nm node so they can be seen to be at an equivalent node to Intel 14-nm FinFET process and FinFET processes from foundries such as Taiwan Semiconductor Manufacturing Co. Ltd. and Globalfoundries.
Hartmann's presentation provided the most recent results measured for the 28-nm FDSOI process made with multi-core ModAp NovaThor processor from ST-Ericsson and made extensive claims for the superiority of 28-nm ST's gate-first FDSOI manufacturing process in comparison with 28-nm bulk CMOS process in terms of ease of manufacture lower power consumption and higher performance.
Mendez shows the FDSOI roadmap now includes a 10-nm process to be
offered in 2016, which will also be the point at which the FDSOI roadmap
would introduce the option of FinFET over SOI.
Click on image to enlarge.
Fully depleted vision for SoCs through 10-nm. Source: SOI Consortium
10 nm seemed to be the limit a while ago but I believe Intel has a 7 nm and 5 nm nodes on their roadmap. More incredible to me is that some feel that they will be able to extend immersion to sub 10 nm! One is left with the question will EUV ever reach mass production?
"A summary slide from Horacio Mendez, executive director of the SOI Consortium, showed the jump with the comment that 14-nm FDSOI would be offered at the same time as Intel's 14-nm FinFET and would show the same performance characteristics but realizable at much lower cost."
Any $ and cent? I don't think so
Bohr stated that Intel looked at both - SOI and bulk and concluded bulk would have a slight cost advantage.
SOI is somewhat "masking" the issue of fin height variation - at least my understanding.
So if Intel can do it with bulk than they are far ahead - Intel continues to minimize height variation which will continue to be advantage at even smaller geometries
World major foundries, TSMC, Samsung, GlobalFoundries, and UMC all get on to the Intel’s FinFET bandwagon after falling behind Intel. They all plan to introduce FDFinFETs at the 14-nm node in 2014, skipping the 22-nm node. The foundries schedule seems to be planed not to be falling too far behind Intel. IBM is the only major company adopting FDSOI for 28-nm and beyond. IBM was not successful in manufacturing any FDSOI and ETSOI after exit from PDSOI as the gate length shrinks. Now IBM Mendez reveals a bold roadmap that skips all technology nodes such as 28nm and 22nm and offers 14nm FDSOI at the same time as Intel’s 14-nm FinFET, and claims the same transistor performance with much lower costs. But the roadmap is unrealizable because of the following reasons:
1) Intel has gained very valuable/critical learning through 22-nm FinFET process development and manufacturing that will help enormously for quick fix of the problems, thus quick transition to 14-nm and beyond. IBM, on other hand, can’t get such learning by skipping the 28-nm and 22-nm FDSOI. As a result, IBM will encounter a larger number of unknown process/manufacturing problems at 14-nm FDSOI, thus will take much longer time and spend more
resources to detect and fix the unknown problems.
2) Successful implementation of FinFET or FDSOI will be comparatively easier at 22-nm than 14-nm. Intel’s orderly approach to 14-nm FinFET without skipping the nodes will win out eventually.
3) 14-nm FDSOI will require an ultrathin approximately 3.5-nm channel layer to suppress transistor leakage current. IBM has to manufacture such thin layer by itself because Soitec can’t deliver it. What Soitec can deliver is the minimum thickness of 12-nm channel layer for the 28nm technology node wafer. How much such a wafer will cost for IBM if it were manufacturable?
In my opinion Mendez roadmap for 14-nm FDSOI will not be achievable in 2014. IBM 14-nm FDSOI will be at least two years behind Intel’s 14nm FinFET or more. Skim