Fujitsu Microelectronics has announced the MB86R02 ‘Jade D’, the latest device in its ‘Jade’ SoC family, which incorporates the powerful 32-bit ARM926EJ-S CPU core with the company’s successful graphics processor ‘Coral PA’. Based on proprietary 90 nm CMOS process technology, ‘Jade D’ is optimised for automotive applications requiring high CPU performance combined with sophisticated 2D/3D graphics. With many special features such as extended temperature range up to 105 °C, spread spectrum clock generation (SSCG) and APIX, the MB86R02 is perfectly suited for all modular automotive display applications.
One of the key features of the MB86R02 is the dual APIX serial gigabit interface from Inova Semiconductors. The APIX technology is becoming the new standard for peer-to-peer real-time transmissions of video and peripheral data in the car. It meets the strict EMC requirements of display applications in vehicles and because of its potential for SoC integration it leads to higher performance at significantly lower system costs.
The built-in links in the MB86R02 can be used for various link speeds up to 1Gbit/s. Both are configurable as transmitter or receiver and support the sideband channel for peripheral data.
Target applications are graphical dashboard systems, head-up display units, on-board navigation systems, rear-seat entertainment, point-of-sale terminals and industrial control panels. Packaged in a 484-pin TEBGA (Thermal Enhanced BGA), the device requires a supply voltage of 3.3V (I/O), 1.8V (DDR2), 1.2V (internal) and is designed to operate over a temperature range of -40 to +105°C.The integrated SSCG ensures reduced electromagnetic interference (EMI) by slight clock modulation.
The ARM926EJ-S is a fullysynthesisableprocessor with a Jazelle® enhanced (Java Acceleration) 32-bit RISC CPU, 16kB instruction cache, 16kB data cache, 16kB ITCM, 16kB DTCM and a memory management unit (MMU). The CPU runs all major operating systems and middleware. Further features include an ETM9 (medium) and JTAG ICE interface, 8-channel DMA and 32-bit timers.
Core frequency is 320MHz (generated by on-chip PLL). On-board peripherals include a unified DDR2 memory supporting 320Mbps (up to 128MB), a parallel flash/SRAM host interface with decryption engine, CAN, MediaLB, ADC, I2C, I2S, PWM, SPI, UART, GPIO and an external interrupt.
Fujitsu’s ‘Coral PA’ processor provides sophisticated features for embedded graphics applications that require more display and rendering functions. These features include a rendering engine for 2D/3D graphic acceleration functionscombined with ROP and blend operations, a geometry processor supporting floating-point transformations for smooth graphics animation and a dual-display capability that enables independent contents to be shown on two connected screens.
Display panels with a resolutions ranging from 320 x 240 up to 1280 x 768 are supported on two separate outputs.A built-in TCON unit allows panels to be attached without the need for further controller logic, which is a significant cost benefit. A signature unit for safety, dithering and gamma units for picture quality optimisation are available, as well as pixel and layer blending. The physical interface to a display panel can be APIX, RGB digital or RSDS.
Other key graphic and video features include:
• A texture mapping unit (up to 4096 x 4096)
• Bit-Blt Unit (up to 4096 x 4096)
• Alpha Bit-Blt and ROP2 functions
• Six layers of overlay display (Windows) per channel
• Alpha plane and constant alpha value for each layer
• Dual digital video input (various formats including YUV, RGB, ITU656)
• Video scaler (up/down scaling)
• Brightness, contrast, saturation control for video
• Built-in alpha blending, anti-aliasing and chroma-keying
Availability and Support
Sample quantities of MB86R02 will be available from Q4 2009. A dedicated evaluation board and sample programs will also be offered in this time frame.
About Fujitsu Microelectronics Europe
Fujitsu Microelectronics Europe (FME) is a major supplier of semiconductor products. The company provides advanced systems solutions to the automotive, digital TV, mobile telephony, networking and industrial markets. Engineers from design centres dedicated to microcontrollers, graphics controllers, mixed-signal, wireless, multimedia ICs and ASIC products work closely with FME’s marketing and sales teams throughout Europe to help satisfy customers’ system development requirements. This solutions approach is supported by a broad range of advanced semiconductor devices, IP and building blocks.
For more information, see: http://emea.fujitsu.com/microelectronics
Note: The above text is the public part of the press release obtained from the manufacturer (with minor modifications). EETimes Europe cannot be held responsible for the claims and statements made by the manufacturer. The text is intended as a supplement to the new product presentations in EETimes Europe magazine.