Breaking News
Design How-To

Acoustic software streamlines truck cabin noise mitigation

NO RATINGS
Page 1 / 2 Next >
More Related Links
View Comments: Oldest First | Newest First | Threaded View
Kinnar
User Rank
Author
re: Acoustic software streamlines truck cabin noise mitigation
Kinnar   9/9/2011 6:49:31 PM
NO RATINGS
Noise reduction in trucks or heavy vehicles is a very much essential requirement, it is a very great that care is taken not completely isolate the sound from the drivers ear, as the sound is a very handy tool for him to know the condition of the entire truck. Still the article is praising the LMS Vitrual.lab software a lot but very little technical detail is provided, yes only figures are there but without the explanation they are not of much use.

trevorspacey
User Rank
Author
cars
trevorspacey   8/6/2014 11:10:13 AM
NO RATINGS
Performing acoustic tests through hardware testing takes a lot of time and the results are not very accurate, the creation of vehicle acoustic models allows the engineers to perform such acoustic tests much faster. Will this technology be available to everyone so they could check their vehicle`s acoustic performance at an auto repair shop in Texas?

Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed