Solar panels are mounted on the roof of a building facing southwest. Southern exposure is obvious. Southwest exposure is frequently needed to capture the afternoon sun. A typical solar panel delivers 24VDC. Solar panels connected in series drive an inverter which connects to the grid. Grid voltage to a home or business is 115VAC or 230VAC. The peak value for a 230VAC system is 325V. The series connected panels form an array which typically provides 350VDC to the inverter to power the grid.2. Voltage, current and power characteristics of a solar cell
The equivalent of a solar cell is shown in Figure 2
The cell contains a PN junction and can be treated like a diode. The current through the diode is the same as a standard diode and is called the dark current. The current generator produces a current in the opposite direction proportional to the absorbed light. Series resistance Rs represents conduction losses where power loss is proportional to the square of the output current. Parallel resistance Rp is caused by leakage current due to poor insulation around the edge of the cell. The effect of Rs and Rp on a solar panelís output characteristics will be shown later in this section.
From the basic diode representation, a solar cellís current as a function of voltage and power as a function of voltage is developed. Figure 3
shows the I-V characteristic of a solar cell with no illumination.
Figure 3Figure 4
shows the cellís I-V characteristic with light applied.
Since the cell produces power, we are used to seeing a current vs. voltage curve flipped upside down as in Figure 5