Dallas, TX -- Providing liquid crystal display (LCD) TV manufacturers with the feature set required to meet high efficiency audio demands, Texas Instruments Incorporated (TI) announced two new stereo Class-D audio power amplifiers for 17 to 23 inch LCD-TVs. The two new devices feature efficient Class-D operation, driving up to 10W of continuous stereo output power with no external heat sink, simplifying design and reducing component count, total system cost and space requirements for LCD-TVs.
The TPA3005D2 and TPA3008D2 are 92 percent efficient when driving 16-ohm speakers. Competitive Class-D amplifiers operate 120 percent hotter, and competitive Class-AB or linear amplifiers operate 140 percent hotter. The TI Class-D amplifiers' high efficiency results from their 250-kHz pulse width modulated operation and extremely low output FET on resistance (RDS(on)). Competitive solutions switch at higher frequencies or feature scaled-down output FETs, which cuts cost but reduces efficiency and increases heat. TI provides the best balance of fidelity without high switching losses through the 250-kHz switching frequency featured in the TPA3005D2 and TPA3008D2, while saving cost by providing the exact feature set the market requires.
The TPA3008D2 includes features that no other competitor provides at the same performance and price node such as four custom integrated gain settings, which eliminate external resistors, and an integrated auto recovery circuit that restarts the IC after a short circuit is cleared.
The TPA3005D2 and TPA3008D2 are the latest additions to the TPA3000D family. Other Class-D amplifiers in the family include the feature-rich TPA3004D2, a 12W stereo amplifier with DC volume control and pre-outs for headphone drive, and the high-power TPA3001D1, a 20W mono audio power amplifier. All TPA3000D amplifiers operate from a nominal 12V supply, have less than one percent total harmonic distortion plus noise (THD+N) at half the rated output power level and less than 10 percent THD+N at the maximum rated output level. Furthermore, all the stereo TPA3000D audio amplifiers are in the same package with very similar pinouts to help minimize design effort when porting board layouts between projects.
The TPA3000D family is part of TI's complete offering of products focused on audio systems, including all-digital audio components as well as digital plus analog audio solutions. TI is able to shorten a manufacturer's time-to-market by offering world-class systems expertise, software and support.
The TPA3005D2 Class-D audio power amplifier is available now in a standard PowerPAD surface mount 48-pin quad flat pack (QFP) from Texas Instruments and its authorized distributors. The TPA3008D2 will be available in June in a standard PowerPAD surface mount 48-pin QFP. Suggested resale pricing in quantities of 1,000 is $2.95 for the TPA3005D2 and $3.10 for the TPA3008D2.
TPA3008D2 data sheet
TPA3005D2 data sheet
Texas Instruments Incorporated, Semiconductor Group, SC-04112, Literature Response Center, 14950 FAA Blvd., Ft. Worth, TX 76155. Tel: 1-800-477-8924