Abingdon, UK Combining eight high performance UARTs and a PCI compliant host interface in a single chip, the OX16PCI958 communications controller from Oxford Semiconductor provides designers with the means to dramatically simplify multi-port serial to PCI bus design. An alternative to many dual chip solutions, the 160-pin QFP packaged device offers significant PCB space savings, and, by supporting both 3.3 V and 5.0 V bus systems, this cost effective part enables the development of add-in cards with universal application appeal. Compliant with the PCI local bus specification 3.0 and PCI power management specification 1.1 the highly integrated OX16PCI958 will benefit a wide range of PCI-based hardware, including PoS equipment, industrial automation systems and remote servers. Software compatible with industry standard 16C550 types, the UART ports of the OX16PCI958 are easily configured to suit the needs of RS232 and RS422 applications. Highly programmable, the controller offers deep FIFOs with tuneable trigger levels, hardware out-of-band flow control and a clock prescaler, enabling designers to optimise data flows and configure application specific data rates up to a maximum of 4.125 Mega baud, using a 16.5 MHz clock. Oxford Semiconductor is supporting its latest high performance UART / PCI bridge solution with drivers for Windows 98, 2000, XP and CE and Linux operating systems, an evaluation board and comprehensive application note. The controller is priced at 15.50 USD in 10,000 piece quantities and is sampling now. Oxford Semiconductors Ltd , Abingdon, UK. www.oxsemi.com.
Join our online Radio Show on Friday 11th July starting at 2:00pm Eastern, when EETimes editor of all things fun and interesting, Max Maxfield, and embedded systems expert, Jack Ganssle, will debate as to just what is, and is not, and embedded system.