Santa Ana, Calif. ITT Interconnect Solutions has extended the current rating of its Cm5 series servomotor connector. Capable of handling current to 40 A in a low-profile design, the connector is suitable for small servomotor applications requiring high current and where space is at a premium including industrial motion control, robotics, factory automation and material handling.
The Cm5 series connectors are said to weigh 50 percent less, occupy less space and provide one-third the height as compared to conventional connector designs. The Cm5 connectors use a 4-way (3 phase, 1 ground) power connector and signal connector providing several configuration options: 4-way sensor and brake, or 18- or 24-way signal.
The power connectors feature a cable diameter of 19 mm, maximum current of 40 A at 80°C, contact resistance of less than 5 mohms, and a maximum voltage of 630 Vac.
The signal connectors feature a cable diameter of 11 mm, maximum current of 3 A at 80°C, contact resistance of less than 10 mohms, and a maximum voltage of 48 Vac.
The Cm5 series connectors feature crimp contacts, superior vibration resistance and are completely shielded and sealed, including two sealed entries for power and signal cables. The connector meets IP67 approvals. Insulation resistance for the Cm5 connector is more than 5000 Mohms, with an operating temperature range of -40°C to +125°C.
Pricing: $50.00 to $75.00 each in quantities of 500 to 5000.
Availability: Lead time is from eight to ten weeks.
Product information: Cm5 connectors
ITT Interconnect Solutions, www.ittcannon.com