The folks at Kane Computing tell me that they've recently signed a worldwide distribution agreement with XAD Communications to distribute the XACQ-S2E analog input/output card.
The XACQ-S2E is a Xilinx Spartan200E FPGA device-based rapid acquisition/prototyping board which allows real time implementation of digital designs on multi platforms.
At the heart of the XACQ-S2E, lies the 200K gate Xilinx XC2S200E FPGA. Digital connectivity to the outside world is provided by a Cypress based CY7C68001 USB2.0 controller as well as by 2 headers compatible with Texas Instruments based DSK/EVM boards' Memory and Peripheral Interfaces. A 10-bit ADC/DAC pair provides full duplex stereo IQ signal conversion at sampling rate up to 20MS/s.
The XACQ-S2E contains 28 GPIO (general purpose input output) pins, 3 input switches and 3 LEDs for diagnostic and debug purposes.
The XACQ-S2E has on board FLASH memory to support stand alone operations. A JTAG port lets the user programme the FLASH memory as well as the FPGA using a parallel port programming cable JTAG-PP.
This versatile product can be used as a standalone board booting from the on board FLASH memory, as a hardware accelerator connected to the PC through the USB2.0 port, or as a daughterboard plugged to the TI compatible DSP boards using EMIF/EPIF interface.
The XACQ-S2E is ideal for use as a high speed acquisition card for quick development and testing and can also be used as an OFDM transmitter/receiver, a low data rate MIMO demonstrator or single carrier modem development platform.
For more details, please visit www.kanecomputing.co.uk.