Austriamicrosystems has expanded its magnetic rotary encoder portfolio with the AS5145, a 12-bit encoder IC especially designed for the growing demands in automotive.
The AS5145 is a contactless, complete system-on-chip magnetic rotary encoder for accurate angular measurement over a full turn of 360° with a resolution of 0.0879° = 4096 positions per revolution. This digital angle data is available using a simple serial interface or as PWM signal. In addition, an incremental quadrature output mode with an improved interpolation algorithm can be enabled and permanently programmed with a resolution of 10 up to 12 bits. Due to the higher noise performance the accuracy is further improved.
"'Boost the precision of your rotation' was the vision behind the new device AS5145 whose target applications include transmission/gear box solutions where high accuracy in a harsh environment is required", commented Bernhard Czar, Marketing Director Automotive at austriamicrosystems. "The AS5145 also performs excellently in headlight position control units and fits perfectly into torque and valve position sensing applications. With the AS5145, austriamicrosystems expands its encoder portfolio with the next premium encoder for automotive sensing applications."
Besides all standard features of austriamicrosystems' encoder family such as user-specific zero programming, Chip-ID and diagnostic functions for the correct positioning of the magnet, the AS5145 additionally provides a special feature to synchronise external electronics with itself as well as a Sin/Cosine digital output mode. If this mode is activated, a 16 bit sinus and 16 bit cosines digital data of both channels will be switched out and an accurate calculation can be done externally.
For cascading multiple devices, a "Daisy Chain" mode is implemented allowing position data to be read out over the serial two-wire-bus. An internal voltage regulator allows the AS5145 to operate at either 3.3 V or 5 V supplies. Despite the wide ambient temperature range of up to 150°C, no additional temperature compensation and calibration of the device is required. The AS5145 is available in a lead-free SSOP-16 package.
austriamicrosystems is a leading designer and manufacturer of high performance analog ICs, combining more than 25 years of analog design capabilities and system know-how with its own state-of-the-art manufacturing and test facilities. austriamicrosystems leverages its expertise in low power and high accuracy to provide industry-leading customized and standard analog products. Operating worldwide with more than 1,000 employees, austriamicrosystems focuses on the areas of power management, sensors & sensor interfaces, portable audio and car access in its markets Communications, Industry & Medical and Automotive, complemented by its Full Service Foundry activities.
Note: The above text is the public part of the press release obtained from the manufacturer (with minor modifications). EETimes Europe cannot be held responsible for the claims and statements made by the manufacturer. The text is intended as a supplement to the new product presentations in EETimes Europe magazine.
Join our online Radio Show on Friday 11th July starting at 2:00pm Eastern, when EETimes editor of all things fun and interesting, Max Maxfield, and embedded systems expert, Jack Ganssle, will debate as to just what is, and is not, and embedded system.