PORTLAND, Ore. Epson Toyocom is claiming the smallest real-time clock chip fashioned by combining a quartz microelectromechanical system resonator with an ASIC. The chip was wire-bonded in the same 3.4-by-1.7-by-1-mm package.
The RX-4571BD model uses a three-wire serial interface; the RX-8571BD uses NXP Semiconductor's I2C bus interface.
"These are the smallest footprint real-time clocks available today," claimed Michael Semos, product marketing engineer at Epson (El Segundo, Calif.). The RX-4571BD consumes 43 percent less cubic volume while the RX-8571BD uses 52 percent less volume than previous real-time clocks.
Epson Toyocom's clock chip resonators are made by processing quartz wafers using photolithography, etching, metallization and sacrificial-layer removal--the same steps used to make silicon MEMS chips. Quartz is a piezoelectric material that naturally oscillates at a steady rate when activated with an electric current. Silicon MEMS chips require more signal conditioning to achieve equal performance.
Epson Toyocom's New Platform Oscillators combine a tiny, hermetically-sealed quartz crystal in the same package with the time-based ASIC.
The new clocks could be used in portable devices ranging from digital cameras and handheld medical devices to office and factory automation equipment. Their ultra-low standby power--as little as 0.22 microamps--allows the chips to keep time without using up battery power in portable devices.