TiePie engineering introduces the TiePieSCOPE HS805, a PC oscilloscope that can sample at 1 Giga samples per second on one channel, 500 Mega samples per second simultaneously on two channels, real time. To display the measured signals accurately and without distortion, the TiePieSCOPE HS805 has a high bandwidth of 250 MHz.
32 MiS long record length
When measuring at high sample rates, a long record length is a must, otherwise the acquisition buffer is full before the signal is measured. Therefore the TiePieSCOPE is equiped with a large memory buffer of 32 Mega samples per channel. This enables long measurements at full speed.
20 MHz Arbitrary Waveform Generator
The TiePieSCOPE HS805 is equiped with an on-board Arbitrary Waveform Generator. This waveform generator allows to generate signals up to 20 MHz, with amplitudes up to 12 Volt peak value. Signal shapes include sine wave, square wave, triangular wave, noise and user defined arbitrary signal shapes. For arbitrary signals, a waveform buffer of 32 Mega samples is available. The maximum sampling clock for generating signals is 200 MS/s. The generator can also be used to generate previously measured signals.
Typical applications for the TiePieSCOPE HS805 with it’s high sampling rate and long record length are debugging fast serial communications, like SPI, ProfiBus and CAN bus signals. The high sampling rate enables capturing the fine details of the signal. The long record length makes sure that a complete block of the serial communication can be captured. The AWG can then be used to regenerate the signal, to simulate the original source in your lab.
The TiePieSCOPE H805 comes with sophisticated Multi Channel measurement software that turns your TiePieSCOPE HS805 into an oscilloscope, a multimeter, a spectrum analyzer and a transient recorder.
Mathematical operations like adding, subtracting, multiplying, dividing, integrating, differentiating etc. are available in the form of processing blocks Besides the mathematical operations, there are also several processing blocks to perform other operations on the data, like determining minimum or maximum values, limiting to specified range, averaging, filtering, applying gain and offset, etc. Combining these mathematical processing blocks gives unrivalled possibilities in constructing complex mathematical operations. The results of these operations can be displayed in one or more graphs, can be displayed in numeric displays and can be written to disk in various common formats. The software also provides an I2C protocol analyzer and a serial protocol analyzer.
For more information regarding the TiePieSCOPE HS805, visit the TiePie engineering website www.tiepie.nl
TiePie engineering is a Dutch company developing and selling computer controlled measuring instruments. It was founded in 1987. The head office is located in Sneek, in the north of The Netherlands. A second sales office is located in the United Kingdom, TiePie engineering (UK). The sales market areas of TiePie measurement instruments are: industrial process automation, automotive test and measurement, service departments, medical applications, research centers and educational institutes.
8601 WL Sneek
t. +31 (0) 515 415 416
f. +31 (0) 515 418 819
Note: The above text is the public part of the press release obtained from the manufacturer (with minor modifications). EETimes Europe cannot be held responsible for the claims and statements made by the manufacturer. The text is intended as a supplement to the new product presentations in EETimes Europe magazine.