Analog Devices, Inc. introduced a dual white-LED (light-emitting diode) flash driver that maximizes the limited current available in battery-operated digital cameras to increase flash brightness to over 200 Lumens and improve picture quality. The ADP1655 inductor-based flash driver improves the reliability of high-resolution camera operation in cell phones, digital still cameras, camcorders, PDAs and other camera-equipped portable devices, particularly in dark environments. In a cell phone application, the new driver's proprietary transmit masking function allows the camera flash to run at a higher LED current while simultaneously operating the phone's RF transceiver to monitor the cellular base station for incoming signals.
The ADP1655 integrates a 2-MHz synchronous boost converter, a 500 mA (milli amp) programmable current source, and an IC interface, which enables timers and currents to be easily programmed and data to be read back relative to system operation and safety controls. With 5 percent flash-current accuracy, the ADP1655 also improves flash brightness by allowing the camera to increase current to the LED without crossing safety thresholds that would trigger the phone to shut down.
The new driver additionally includes a high-side current source that allows the flash LED string to be connected to the camera's ground plane, eliminating the need to route the LEDs back to the IC. This allows designers to simplify printed-circuit board routing, which reduces circuit trace length and thermal dissipation and allows the camera to be designed using a more compact layout. For more information visit: http: www.analog.com/pr/ADP1655.
Availability and Pricing
The ADP1655 is available now, priced at $0.95 each per 1000 in a 12-ball WLSCP (0.5mm pitch) package.