PARIS Vishay's Z203 metrology and laboratory ultra-high-precision resistors feature a maximum TCR of 0.5 ppm/degree C, a load-life stability of 50ppm at +70 degree C for 10,000 hours, and a tolerance to 0.005 percent.
The ultra-high-precision Bulk Metal Z-Foil resistors are built using Z1-Foil technology that features new orders of accuracy, stability, and fast thermal stabilization in sizes small enough for permanent assembly in operational equipment.
The Z203 series offers an immediate answer to many resistor applications currently believed unsolvable, including secondary standards, feedback devices for operational amplifiers, precision voltage dividers, meter multipliers, precision bridge resistors, and decade voltage dividers.
As a result, the devices open entirely new areas of design for which the use of resistors had not been considered.
The Z203 devices are the result of a unique concept in resistor manufacturing. A proprietary new generation of the Bulk Metal Z-Foil element with known and controllable properties is applied to a special ceramic substrate.
A resistive pattern is then photo-etched by an ultra-fine technique developed by Vishay. The device's etched planar construction results in the extremely low and reproducible reactance needed for high-frequency and pulse applications.
The Z203 resistors are enhanced by post manufacturing operations (PMO) exercised after the manufacturing cycle has been completed. Some of these exercises are a standard part of the manufacturing cycle and are only repeated during the PMO cycle to gain added stability or confidence in the product.†
The foil resistor load-life curve shows an increase in resistance from the first load application, but flattens out to no further change after the first few hundred hours of loading.
This knee in the load-life curve is reduced significantly by a special accelerated load-life operation performed by Vishay, resulting in a flat response immediately after installation. Other resistive devices show a continuous change when subjected to these same stresses and are driven out of tolerance.
The optional PMO for this product includes the combination of thermal shock, power shot, and special burn-in.
The Z203 released today features electrostatic discharge (ESD) immunity up to 25,000 V, a rise time of 1ns with essentially no ringing, current noise of less than -40 dB, thermal EMF of 0.1microV/degree C maximum, a maximum working voltage of 300V, and a voltage coefficient below 0.1 ppm/V.†
The resistors offer a resistance range of 10 Ohm to 100 kOhm, are not restricted to standard values or minimum order quantities, and can be supplied from one unit with "as required" values (e.g. 9.997 kOhm vs. 10 kOhm) with no extra cost or delivery time.
The devices offer a non-inductive, non-capacitive design, and feature lead (Pb)-free or tin/lead alloy terminal finishes.
Samples and production quantities of the Z203 series resistors are available today, with lead times from five working days and standard orders from four weeks.
Visit Vishay Intertechnology's website