Rohde & Schwarz has extended the analysis bandwidth of its high-end FSW signal and spectrum analyzer from 160 MHz to 320 MHz, allowing the instrument to be used in a variety of applications related to wideband digital communications and radar systems.
Engineers can use the FSW to analyze radar signals with very short pulses of less than 10 ns or wideband signals in radar systems, such as automotive CW or pulsed radar. The FSW can also test multistandard radio base stations and perform modulation analysis on radio links with a channel bandwidth of 250 MHz.
Models in the FSW series offer frequency ranges from 2 Hz to 8 GHz, 13.6 GHz, 26.5 GHz, 43.5 GHz, and 50 GHz (up to 110 GHz with external mixers). Along with the wide analysis bandwidth of up to 320 MHz, the analyzers provide a dynamic range of –88 dBc (with noise cancellation) and low phase noise of –137 dBc (1 Hz) at a 10-kHz offset (1 GHz carrier).
Users can upgrade their FSW analyzer from the 160-MHz to 320-MHz analysis bandwidth by entering a key code. No hardware modification is necessary.
Join our online Radio Show on Friday 11th July starting at 2:00pm Eastern, when EETimes editor of all things fun and interesting, Max Maxfield, and embedded systems expert, Jack Ganssle, will debate as to just what is, and is not, and embedded system.