Semtech Corp. has launched industry’s first smart current sink LED backlighting platform with on-chip digital lighting effects for high-end handheld displays. The new platform incorporates Semtech’s smart Automatic Dropout Prevention (ADP) technology for high-quality current sink drivers that can replace boost converters and charge pumps in high-end handhelds, while providing high-quality display backlighting.
The new SC667 and SC668 current sinks reduce the total parts count and extend battery life compared to boost converters or charge pumps, and offer far superior illumination quality compared to conventional current sink drivers. On-chip digital lighting effects provide the flexibility to incorporate fade, breathe, and blink effects without changing the firmware.
With current sink topologies, the supply voltage available to the white LEDs is reduced toward the end of the battery discharge cycle. Semtech’s ADP technology ensures that the LEDs dim in uniform and imperceptible steps as the battery voltage declines. The current sink approach also extends battery life, because there are no boost converters to draw higher current as in conventional implementations.
Prior to the ADP approach, current sinks were not optimal for high-end handheld devices. This was because line transients caused by the heavy system loads (for example: RF transmission, camera, camera flash, Internet access) produced display flicker when these loads were enabled and disabled. Semtech’s smart ADP topology eliminates this problem via automatic and simultaneous monitoring of each current sink to avoid dropout as the system loads turn on and off. Each time a current sink with ADP approaches dropout, the digital logic reduces the current setting for all of the backlight LEDs in small increments that are imperceptible to the human eye. This process continues until all current sinks have sufficient headroom to regulate their current at the reduced setting. When this point is reached, the ADP circuitry locks the current setting, thereby eliminating any display flicker.
The SC667 and SC668 are the first current sinks to incorporate ADP technology. These devices also integrate a number of functions to enable high-end features on portables, including an ambient light sensing/control circuit that sets backlight brightness based on surrounding lighting conditions. A PWM dimming interface that incorporates a digital low-pass filter is also included, providing the capability to perform content-adaptive brightness control, versus 'always-on' illumination.
The SC668 provides eight current sinks, while the SC667 features seven current sinks plus an interrupt request indicator signal to tell the host processor when an ambient light threshold has been crossed. Both devices include an on-chip digital lighting-effects engine to control LED fade-in/fade-out, breathe, blink, auto-dim full, and auto-dim partial; an I 2C interface to program and control the LEDs; and four programmable, 200mA low-noise LDO regulators to manage the power for multiple embedded peripherals.Key Features
- On-chip digital lighting effects (fade, breathe, blink) without changing firmware
- Ambient light sensing option can automatically adjust backlight brightness
- Low parts-count: only one low-voltage capacitor needed, no inductor required
- I2C programming interface (fast and standard modes) ±0.5% (typ)
- LED current matching , ±1.5% (typ) LED current accuracy
- Four low-noise LDO regulators
- Ultra-small, low-profile 20-pad MLPQ package with exposed thermal pad: 3 x 3 x 0.6mm
Cell Phone: LCD Display, Keyboard/Keypad Backlight Digital
Camera: LCD Display & Backlight, Keyboard/Keypad Backlight
MP3 Player: LCD Display & BacklightPricing and Availability
The SC667 and SC668 are available immediately in production quantities and are priced at $1.15 for the SC667 and $1.29 for the SC668 each in 3,000-piece lots. Ordering codes are SC667ULTRT and SC668ULTRT. Evaluation boards (SC667EVB and SC668EVB) are also available. Semtech offers comprehensive design assistance, including field- and factory-based support. Data sheets, volume pricing, and delivery quotes, as well as evaluation kits and samples, are available at www.semtech.com/info