Agilent Technologies Inc. has released an automated compliance test package for PCI Express(PCIe) 3.0 physical-layer transmitter compliance testing that includes measurement support for the new PCIe 8-GT/s interface. The Agilent N5393C compliance test software for Infiniium 90000 Series oscilloscopes performs a wide range of oscilloscope-based tests for the PCIe 1.x, 2.x, and 3.0 standards. It also provides early 8-GT/s physical layer transmitter measurements for customers designing to the requirements of the PCIe 3.0 specification. Advance access to measurements enables engineers to address potential issues early in the design cycle and get their products to market faster.
The N5393C PCIe compliance test software for Infiniium 90000 Series oscilloscopes provides design and validation engineers with a fast and easy way to verify physical layer transmitter compliance for PCIe 2.5-GT/s, 5-GT/s end point, root complex systems and devices and for 8.0-GT/s chipsets. The software:
- provides automated compliance test support for the BASE and CEM measurement points supporting PCIe 1.x and 2.x standards, as well as BASE specification support for the PCIe 3.0 standard;
- supports de-embedding of test fixtures and cables to help improve voltage and jitter margin measurements when used with the optional Agilent N5465A InfiniiSim waveform transformation toolset;
- displays the results in a flexible report format; and
- provides a margin analysis that shows how closely a device passes or fails each test.
Engineers designing and developing PCIe 3.0 devices also can use the Agilent J-BERT N4903B high-performance serial BERT for physical-layer receiver compliance testing and characterization. They can use the Agilent DCA-J 86100C TDR system for characterizing PCIe 3.0 channels.
Agilentís Infiniium 90000 X-Series 16-GHz to 32-GHz oscilloscopes are well-suited for PCIe 3.0 product testing. They offer the industryís lowest noise floor, deepest memory and flattest response. Using the 90000 X-Series oscilloscope and the automated N5393C PCIe compliance test software, engineers can maximize their design margins and gain greater insights into their system performance. Agilentís complete portfolio of oscilloscopes is available in a variety of form factors, from 20 MHz to 90 GHz.
For additional information about Agilentís N5393C PCIe test software, see www.agilent.com/find/N5393C
. Information on Agilentís total PCIe 3.0 test solution portfolio is available at www.agilent.com/find/pciexpress
The Agilent N5393C SATA compliance test application is available now with prices starting at $9,000.