Advanced Power Electronics Corp. has announced two power control ICs at Electronica this week.
The APU1205-3 is a linear voltage regulator with better than 2% initial voltage accuracy. It is targeted at handheld battery powered applications.
Also announced is the APU3037-3 controller IC designed to be a low cost synchronous buck regulator for on-board dc to dc converter applications.
The APU1205-3 has a dropout voltage of only 270mV at 300mA or 170mV at 150mA. Quiescent current at shutdown is 5ľA. It also features TTL-compatible enable/shutdown control input, current limiting and thermal shutdown. The APU1205-3 is available in fixed and adjustable output voltage versions in a small SMT 5 pin SOT-23 package. This package is halogen-free and compliant with both current RoHS and REACH environmental requirements for hazardous materials.
The APU3037-3 features an internal 200kHz oscillator (400kHz for the A version), under-voltage lockout for both Vcc and Vc supplies, and external programmable soft-start function as well as output under-voltage detection that latches the device off when an output short is detected. It operates with single 5 or 15V supply in fixed frequency voltage mode and has a 500mA peak output drive capability.
The APU3037-3 package is also halogen-free and compliant with both current RoHS and REACH environmental requirements for hazardous materials.
Applications include DDR memory source/sink Vtt, graphics cards and hard disk drives, or any other products that require a low cost on board 1.8, 2.5, 3.3 or 5V dc/dc converter.
Join our online Radio Show on Friday 11th July starting at 2:00pm Eastern, when EETimes editor of all things fun and interesting, Max Maxfield, and embedded systems expert, Jack Ganssle, will debate as to just what is, and is not, and embedded system.