Breaking News
Slideshow

Building a Better Human

NO RATINGS
More Related Links
View Comments: Oldest First | Newest First | Threaded View
Sheetal.Pandey
User Rank
Author
building a better human
Sheetal.Pandey   12/23/2013 1:13:50 PM
NO RATINGS
This is a very good news for people who are in need. More companies should do their production and can be made economical and made available at the nearest chemists shops. This is another way to make people happy who are unable to do the basics things in life just becuase they have lost some parts.

zewde yeraswork
User Rank
Author
bionic legs
zewde yeraswork   12/23/2013 2:11:40 PM
NO RATINGS
It's amazing how something that should be so critical among uses of technology could be reduced to little more than an afterthought. Of course bionic legs are important. In fact, they should be a priority as far as society's concerns and use cases for a smarter world filled with embedded applications for everything. We try to make driving and cooking and other things marginally better for most of us when we could make something as fundamental as walking a whole lot bette--or should I say possible in the first place--for a few of us.

rick merritt
User Rank
Author
Re: building a better human
rick merritt   12/23/2013 5:58:54 PM
NO RATINGS
A provacative first picture ;-)

_hm
User Rank
Author
Power for Rex
_hm   12/23/2013 7:28:05 PM
NO RATINGS
What is source of power for Rex? It it has to be better human, it need to generate its own power too.

 

 

wilber_xbox
User Rank
Author
Re: Power for Rex
wilber_xbox   12/30/2013 10:19:51 AM
NO RATINGS
Apart from the energy source, i think that weight and response will also be a deciding factor.

krisi
User Rank
Author
Re: Power for Rex
krisi   1/12/2014 11:10:32 PM
NO RATINGS
Pretty cool...I am curious about power dissipation too

pensiontracingservice
User Rank
Author
Building a better Human
pensiontracingservice   1/22/2014 6:10:29 AM
NO RATINGS
Its incredible, this is going to give hope to a lot of people who have suffered injuries which have changed them forever. However i feel this technology is going to be out of reach of everday people for quite a while simply due to the cost factor.

 

______________________________________________________________________________

 

 

 

 

 

 

http://pension-tracing-service-uk.co.uk

Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed