Breaking News
News & Analysis

Internet of Things: 50 Billion Is Only the Beginning

2/28/2014 11:00 AM EST
7 comments
NO RATINGS
More Related Links
View Comments: Newest First | Oldest First | Threaded View
Pablo Valerio
User Rank
Author
Re: That's a lot of connections
Pablo Valerio   3/20/2014 11:57:07 AM
NO RATINGS
@prabhakar_deosthali, that's true but we are only starting to scratch the surface of the IoT ecosystem, and most devices only transmitt a few kbytes of data.

Using IPV6 and a combination of 3G/4G/5G networks can support the connectivity. Bandwidth problems are occurring because heavy use of multimedia applications on mobile devices, something it didn't happen until a few years ago. 

prabhakar_deosthali
User Rank
Author
Re: That's a lot of connections
prabhakar_deosthali   3/13/2014 7:50:17 AM
NO RATINGS
True! IPV6 will solve the problem of unique adddresses to the devices .

But what about the bandwidth requirements.

Assuming we allow free flow trafic between all the devices world wide over the internet of things , the bandwidth requirements of routers,swicthes and all those intermediataries will increase many thousand times . The wwwhole internet infrastructure will need an overhaul.

sushantsaraswat
User Rank
Author
Re: That's a lot of connections
sushantsaraswat   3/13/2014 6:33:03 AM
NO RATINGS
IPV6 will be the perfect solution to accomodate the requiremtn of being uniquely identified by each connected device.

Also, it will be interesting to know which organizations are driving this forward in terms of building platforms,
products. Also the role software vendors would play in this huge ecosystem.

Following up on this, I came across and registered for a webinar on Internet of Things- Driving the Next Decade http://j.mp/1lvIuQC

unggul
User Rank
Author
Re: That's a lot of connections
unggul   3/7/2014 5:50:33 PM
NO RATINGS
please have a look at 6lowpan. works have been done a lot in simplifying ipv6 for sensor nodes.

Pablo Valerio
User Rank
Author
Re: That's a lot of connections
Pablo Valerio   3/1/2014 11:34:03 AM
NO RATINGS
@chanj, I believe IPv6 could solve many issues. For starters it could render NAT obsolete, and allow direct IP connections to occur.

There are enough IPv6 addresses to assing an unique IP to a single brick.

chanj0
User Rank
Author
Re: That's a lot of connections
chanj0   2/28/2014 8:34:28 PM
NO RATINGS
IPv6 seems to be inevitable and yet, the lengthy address could be a challenge to the communication among IoT devices and gateway.

daleste
User Rank
Author
That's a lot of connections
daleste   2/28/2014 8:26:42 PM
NO RATINGS
I guess the bandwidth of most IofT devices will be small, but with that many, it could stress the system.  I guess we need more digits added to the IP address now.

Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed