Design Con 2015
Breaking News
Slideshow

LED Industry Innovations: 6 Trends to Follow

3/19/2014 02:41 PM EDT
17 comments
NO RATINGS
2 saves
Page 1 / 7 Next >
More Related Links
View Comments: Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
AZskibum
User Rank
CEO
Re: Great summary and lots more info at
AZskibum   3/23/2014 11:01:26 PM
NO RATINGS
"most illuminating discussions", LOL! Thanks DrFPGA, I will check it out.

LarryM99
User Rank
CEO
Re: Great summary and lots more info at
LarryM99   3/23/2014 7:49:21 PM
NO RATINGS
You are right, it is an interesting site. I knew that there had to be somewhere where they were pushing the limits and doing interesting things with LEDs, and this is a good example of that. Thanks much for the reference!

DrFPGA
User Rank
Blogger
Great summary and lots more info at
DrFPGA   3/23/2014 6:11:19 PM
NO RATINGS
http://www.allledlighting.com 

If you are interested in what's going on in the world of LED Lighting follow Keith and his trusty minions at www.allledlighting.com for some the the most illuminating discussions on the good, bad and ugly in the LED lighting market.

You will be amazed at the brain power that explodes daily from the site... Really!

AZskibum
User Rank
CEO
Re: LED's and Color
AZskibum   3/23/2014 10:37:14 AM
NO RATINGS
Excellent point. A big factor in my motivation to transition my home lighting from CFL to LED (still a work in progress) was the color of the white LED light. The lights I bought did not specify CRI, only color temperature, but in any case they were a huge improvement over the horrible greenish hue of the CFLs.

_hm
User Rank
CEO
The Best Light Source?
_hm   3/22/2014 6:53:00 AM
NO RATINGS
"and a versatility in the spectrum and character of light beyond that offered by any other source that humans have yet discovered or invented."

Really? CRI for LEDs are pretty poor 95 or 96 at best. How do justify this?

baybal
User Rank
Rookie
Re: Silicon substrate
baybal   3/21/2014 4:15:11 PM
NO RATINGS
No,

Why? It is impossible to put an efficient capacitor or inductor on silicon yet. It is possible however to put other non-conversion related components like dimming.

Even if somebody will manage to make a self-driving chip with high step-down, it will be inefficient in comparison to dedicated driver.

In addition to that, most of led products nowadays are using LEDs in multi-chip modules, in which a lot of cheap blue leds are bundled instead of single, high current one.

GeniusEE
User Rank
Freelancer
Re: LED's and Color
GeniusEE   3/21/2014 12:13:16 AM
NO RATINGS
Motherhood and apple pie

"Best" is worthless in a commodity, non-luxury, market, where good enough is good enough

High CRI means low efficacy. The name of the game with LEDs should be energy use reduction, not spec idealism that poisons the environment.

What held back CFLs initially was that they were expensive.

BitHead77
User Rank
Rookie
Silicon substrate
BitHead77   3/20/2014 6:47:23 PM
NO RATINGS
Wouldn't the use of a silicon substrate also allow some of the drive electronics to be built along side the LED(s) that is(are) being driven?  Could this be used to reduce cost as well?

Bob Marso
User Rank
Rookie
LED's and Color
Bob Marso   3/20/2014 1:13:08 PM
NO RATINGS
One performance specification that held back CFL's acceptance was their poor ability to correctly illunimate the full spectrum of color in our houses.  Our spouses fought CFL's in the living room because they made the living room look like it had jaundice or some liver disease.  LED's are capable of overcoming this - after all the most accurate color rendering of computer images is obtained on LED backlite displays, not florescent backlite displays.

Knowing the color temperature of a light source (measured in degrees Kelvin) is not sufficient to select a good light bulb. The measurement of how wide a color spectrum a light source can accurately display or illuminate is the Color Rendering Index, or, CRI.  The closer to 100 you get, the better the light source.  CRI's in the low 90's are considered the minimum for good color illumination.  I'd like to see all manufacturers of interior lighting sources, no matter what kind, required to specify the color temperature and CRI on their packaging.  This would allow we the consumers to select the best light source and also up the competition among manufacturers to produce a better product.

GeniusEE
User Rank
Freelancer
Re: Supply frequency
GeniusEE   3/20/2014 6:27:22 AM
NO RATINGS
prabhakar_deosthali   3/20/2014 3:53:02 AM: "Does it really now matter at what frequency the grid electricty is supplied? May be I am missing something!"

----------

 

You might want to revisit your freshman year AC Machines class notes

Page 1 / 2   >   >>
Radio
LATEST ARCHIVED BROADCAST
EE Times Senior Technical Editor Martin Rowe will interview EMC engineer Kenneth Wyatt.
Top Comments of the Week
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Times on Twitter
EE Times Twitter Feed
Flash Poll