Breaking News
News & Analysis

Laser Sensor System Scans Railway Tracks

NO RATINGS
1 saves
More Related Links
View Comments: Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
DrFPGA
User Rank
Author
Regular roadways
DrFPGA   8/29/2014 7:22:27 PM
NO RATINGS
If we can do this for regular roadways then the robot pot hole fillers can be easily dispatched.

DrFPGA
User Rank
Author
Re: LED Testers ATTN : EDITOR
DrFPGA   8/29/2014 7:21:15 PM
NO RATINGS
Thanx for spotting these. We need to make sure Max doesn't think we are removing his comments however...

DrQuine
User Rank
Author
Learning from Laser Scanning of Tracks
DrQuine   8/22/2014 1:43:44 PM
NO RATINGS
I'm interested in the kind of information that the scanning system can obtain.  The image looks like a monochrome (green) image of the scene. Obviously this could be useful if the tracks had been sabotaged or suffered gross damage such as the bed being washed out by a flood, missing rail spikes, or severe physical damage to the rail. Does this technology have any value in detecting progressive material failures? Which of the failure modes that require repair can it detect? 

Sanjib.A
User Rank
Author
Re: Pilot engines
Sanjib.A   8/21/2014 11:48:22 AM
NO RATINGS
@prabhakar_deosthali: "...This practice is followed only  for select trains running in sensitive areas where the incidents of manual disruption of rail tracks have happend in the past..."

Okay I understand the context which you described earlier. I did not know that such arrangement was made due to unfortunate miscreants caused by anti-socials. Good to know that this practice saves many lives, for which the cost of running an extra engine for certain trains in certain areas is insignificant.

prabhakar_deosthali
User Rank
Author
Re: Pilot engines
prabhakar_deosthali   8/21/2014 1:37:59 AM
NO RATINGS
@Sanjib

 

It is true that such an option can be expensive.

This practice is followed only  for select trains running in sensitive areas where the incidents of manual disruption of rail tracks have happend in the past.

Just last month a major train accident was averted by such a pilot engine . A section of the track had been blown aprt by explosives and the pilot engine completely derailed while going over it. But it averted a major accident for the train which was to run on that track an hour later.

 

What you have seen in your childhod is right - those small inspection carts can do this job but they are slow speed and can hinder the high speed train trafiic.

 

With the kind of laser scanning talked about in this blog a simplified light weight but high spped tracking by an unmanned light vehicle can be a possible solution.

 

 

 

salbayeng
User Rank
Author
Eye safe?
salbayeng   8/21/2014 12:15:29 AM
NO RATINGS
re: "Utilizing an eye-safe infrared laser (class I), "

That's certainly reassuring to know if I was lying between the tracks, looking up at a passing train that my eyes wouldn't be damaged by laser beams.

 

Sanjib.A
User Rank
Author
Re: Pilot engines
Sanjib.A   8/20/2014 10:37:16 PM
NO RATINGS
@prabhakar_deosthali: "...a pilot engine runs ahead of the train to ensure that there is no track fault or any other obstruction.."

Is that what followed in India? I do not have much idea, but I think that would be a costly affair as an engine per one high speed train would be engaged all that time just to monitor cracks. I have seen a small four wheeled cart carrying people and pushed by a couple of persons slowly on the tracks in my childhood. I believe that was used earlier to monitor the tracks manually long time back. It was done for each sections of every division...can't imagine the number of people engaged into this. Now a days I believe a specialized track monitoring car is used as shown in the link below:

http://www.rdso.indianrailways.gov.in/view_section.jsp?lang=0&id=0,2,465


With this laser based device mounted on the engines (may not be for all) of regular trains for scanning the tracks it would be possible to get rid of those special monitoring vehicles or manual effort. Also the scanning could be done much more frequently that it is currently done. Great piece of equipment.  

Max The Magnificent
User Rank
Author
Re: LED Testers ATTN : EDITOR
Max The Magnificent   8/20/2014 4:03:40 PM
NO RATINGS
@Susan: I removed the comment.

What comment?

Susan Rambo
User Rank
Author
Re: LED Testers ATTN : EDITOR
Susan Rambo   8/20/2014 3:58:32 PM
NO RATINGS
Thanks. I removed the comment.

zeeglen
User Rank
Author
Re: Pilot engines
zeeglen   8/20/2014 1:56:15 AM
NO RATINGS
@prabhakar a pilot engine runs ahead of the train

Now that is a really good idea.


Page 1 / 2   >   >>
Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed