Akustica MEMS microphones are fabricated by its owner Bosch, here an analog bottom-port model measuring just 2-by-3-by-0.93 millimeters. Click here for larger image (Source: Akustica)
Akustica claims its AKU346 is the industry's smallest microphone with a signal to noise ratio (SNR) of 64dB. Occupying less than 6 square millimeters makes it suitable for the headsets supplied with smartphones, Bluetooth wireless headsets, smart-watches and -glasses. For multiple microphone setups, the MEMS microphones are matched within plus or minus 1 dB for accurate noise canceling and voice recognition. Akustica cites tests in which voice command accuracy rates for speakers more than three three feet away from the microphones have increased by greater than 5 percent even for small improvements of SNR of 1-to-2 dB.
All your arguements for digital outputs are valid, and in fact the first startup's first microphone (Akustica) had digital outputs. Unfortunately, its kind of like the VHS versus Beta video take war--if you can remember that far back--everybody was already set up for analog mics (electrets) so much so that even Akustica has had to acquiesce a prodeuce analog models. But I am with you, and think hat eventually all MEMS mics will be digital.
It would be interesting to know how far digital microphones (DMICs) -- MEMS mics that include the A/D converter -- have penetrated within the overall MEMS mic market. From an interface perspective, integrating the A/D into the same package as the MEMS makes so much more sense -- especially for applications requiring many microphones (beam-forming arrays, etc.). From the perspective of the audio processor at the receiving end, the two-wire PDM data & clock interface from a DMIC is so much easier to handle than a low-level analog signal, that it's probably well worth the extra cost of the MEMS mics with built-in A/D converters.
Oh that's an answer with fact figures; my estimation was based on the observation of my own. But yes it is very true that MEMS Mics will be having more chances of acceptance in other left out application with possible use of it for betterment.
Your are right too. Even though there are MEMS mics with HD quality, here is the breakdown on where they are used today (according to IHS)-- mobile phones (70 percent), tablets (13 percent), MEMS mics in headphones that manufacturers supply with their smarphones (9 percent), laptops (6 percent) and wearables (2 percent).
You are right many applications of MEMS Mic array are under development in many different areas, in the filed of mechanical engineering, environmental science, medical electronics etc. Soon many products will be in the market using MEMS Mic arrays. Although these Mics are still not being tried as conventional microphones that are used in live performances.
Beside smartphones, tablets all use MEMS microphones, also many PCs are switching over because they can locate mutiple MEMS in the bezel for noise cancelling and beam stearing. Apple's smart watch due this fall will use MEMS microphones also video camera, still cameras and digital recorders are all moving to MEMS mics. For the next generation, wearables will use MEMS mics and portable medical devices and the list goes on.
Join our online Radio Show on Friday 11th July starting at 2:00pm Eastern, when EETimes editor of all things fun and interesting, Max Maxfield, and embedded systems expert, Jack Ganssle, will debate as to just what is, and is not, and embedded system.