Raspberry Pi LED display board
Jeroen Domburg, known online as "Sprite," was given a very interesting piece of hardware to bring back to life: a dual-color 224x48 LED display board that had previously been used to display information for some kind of transportation system. In a rare occurrence, he was also given all the necessary power supplies and the industrial computer to drive it.
Right in the middle of Jeroen's project documentation you'll get a glimpse into the art of computer hacking. The computer boots up, gives him the hardware specs, then goes to a blank screen. His task was to find out how to get access to this computer and gain full control over the network in a few minutes using publicly available tools.
Once he had the display working like it was originally intended, he had to take it a step further. This is where the Raspberry Pi comes in. With its power, network access, and gpio pins, it was a perfect fit to drive the display. Jeroen loaded a linux distrubution and video client on the board and got the results you see above. Note that the flickering is due to the refresh rate of the screen and the refresh rate of the camera overlapping -- it doesn't have this issue with the naked eye.
RasPi does have a Broadcom ARM Peripherals data sheet that documents BCM2835 GPIOs and serial peripherals connected to RasPi's expansion header. This is enough for most users. The full data sheet is not available, but since you can't buy the BCM2835 in small quantities it wouldn't be that helpful anyway. Some people are upset about this, but it is what it is and there are plenty of alternate boards available, like BeagleBone.
BeagleBone and RasPi address different markets. BeagleBone is targetted at EEs who need lots of I/O pins and serial peripherals, or people who need an integrated Ethernet controller for performance and/or a USB host that's better behaved. RasPi has better video processing, so it's preferable as a media center. The price difference between RasPi Model B (plus an SD card) and BeagleBone Black is minimal.
I have had several professors tell me they refuse to use RPi because Broadcom will not release a DS for the MCU. Does this bother anyone else? RPi is losing potential adopters to Beagle Bone because of this.
Yup, noticed that after I went back to reread the thread. Further investigation does indeed reveal existing dedicated Bitcoin mining hardware that can far outperform the Parallella, at least in this application. And there are now even USB Bitcoin miners, as noted in the Raspberry Pi tutorial mentioned, which shows how to use the Pi as a headless controller and monitor for these devices. Very interesting.
David Patterson, known for his pioneering research that led to RAID, clusters and more, is part of a team at UC Berkeley that recently made its RISC-V processor architecture an open source hardware offering. We talk with Patterson and one of his colleagues behind the effort about the opportunities they see, what new kinds of designs they hope to enable and what it means for today’s commercial processor giants such as Intel, ARM and Imagination Technologies.