The traditional gap between the big four MEMS makers and the rest of the
pack narrowed this year, as strong demand for more MEMS sensors in both
consumer and automotive markets drove strong growth across a range of
suppliers. Knowles Electronics saw better than 20 percent growth to
climb into fourth place with some $440 million in revenues from MEMS
microphones, closing in on HP. Panasonic and Denso were close behind
with more than $350 million in MEMS sales in their largely automotive
Chinese electret microphone supplier AAC made the top
companies ranking for the first time as its MEMS microphone sales jumped
90 percent to about $65 million, as it became the second source
microphone supplier for the iPhone. InvenSense saw some 30 percent
growth as it ramped up production of its inertial sensors and Triquint
saw a 27 percent increase in revenues from its BAW filters.
traditional MEMS market of micromirrors for projectors and for inkjet
heads have matured and slowed. The inkjet market has turned away from
replaceable heads towards fixed-head technologies. That hit revenues at
both the inkjet companies and their manufacturing partners, said Yole.
defines MEMS as three dimensional structures made using semiconductor
processes, but with primarily a mechanical as well as electronic
function. Yole's definition of MEMS includes magnetometers and all
microfluidics, including those made using polymer materials.
Click on image to enlarge.
Yole top 30 MEMS ranking from 2011 for comparison. Source Yole Developpement, March 2012,
Missing from the article -increase in %market capture of fabless vs. IDM MEMS companies. It seems that the big MEMS are in the IDM camp but encouraging trends like that of InvenSense bodes well for fabless.
Nice to see an industry growing! It should not surprise anyone though, given the widespread proliferation of tablets, smart phones, etc that employ MEMs. I was wondering what was the differentiator for ST vs the rest of the competition? Is it price, performance, volume, particular design wins, does anyone know?
January 2016 Cartoon Caption ContestBob's punishment for missing his deadline was to be tied to his chair tantalizingly close to a disconnected cable, with one hand superglued to his desk and another to his chin, while the pages from his wall calendar were slowly torn away.122 comments