ARM showed foils suggesting it could tape out a V8 test processor in 2013 and see customers tape out production 64-bit ARM chips in 2015 and beyond. “We want to co-optimize the process and the processor and solve some of the problems before they come up for our customers,” said Simon Segars, general manager of ARM’s processor and physical IP group in a keynote here.
Segars said TSMC will report more progress on the FinFET collaboration with ARM at ARM Tech Con later this month.
TSMC’s 20-nm design kits—its first to require double patterning--are available for downloading now. “We made the tools as similar to our 28-nm tools as possible so the double-patterning challenges are minimized,” said Hou.
Chip designers will see changes throughout their designs due to the need for double patterning lithography, and they will be the biggest challenges for coming up to speed with the new node, EDA executives said.
A few companies are taping out their first 20-nm test chips and blocks now, but the process won’t be generally available for use until the first quarter. An analog and mixed-signal designer predicted the 20-nm node will have a long life because designers will not want to move on too quickly to the next node given its requirements for yet another redesign.
Separately, TSMC showed its first 40-nm wafers using 2.5-D stacks where separate die are laid out side-by-side on a substrate. One of the wafers used a 512-bit Wide I/O memory at 200 MHz, sitting next to an SoC and two other DRAMs. Wide I/O is designed for use in 3-D stacks with through silicon vias for products such as mobile apps processors.
The wafers aimed to test out aspects of TSMC’s Chip on Wafer on Substrate (CoWoS) process and the Wide I/O memory blocks. Xilinx is shipping a chip with two FPGA die laid on such a process and made at TSMC, and a handful of other companies have test chips in design using the process.
TSMC currently handles the entire CoWoS process in house, in part because the thinned wafers it requires are too fragile to ship to their party packaging companies. But the foundry is open to working with packaging companies once it finds ways to handle the thin wafers safely, Hou said.
Click on image to enlarge.
ARM suggested it will test its V8 design in 16-nm FinFETs next year and see production chips from customers in 2015.