Breaking News
Slideshow: Facebook Drives Open Hardware
1/29/2014

Image 1 of 14      Next >

Image 1 of 14      Next >

Return to Article

View Comments: Threaded | Newest First | Oldest First
rick merritt
User Rank
Author
Your views, please
rick merritt   1/29/2014 10:57:38 AM
Saw something coll that I missed at the first day of the OCP Summit V? Please, chime in.

Sanjib.A
User Rank
Author
Open source h/w...what does it mean?
Sanjib.A   1/29/2014 11:25:58 AM
"Open source" has been a buzz word for quite a long time in the past and present and the topic was discussed & debated more by the firmware and software engineers. As a hardware guy I did not poke much into it. But now I see some changes might be around the corner and if I don't understand and adopt what is good about it, my skill set as a hardware engineer might soon be "obsolete"!! I see that IBM has opened up their server design - the gerbers, schematics etc...it this the trend for the server industries only? I believe some more are going to join in...who are they? What is the advantages for the hardware manufacturers? A few days back I saw an article on "open source PCB"!!! How can this make a revolution? Moreover what the skillset the hardware engineers would have....more hardware engineers would lose job? 

Anand.Yaligar
User Rank
Author
Re: Open source h/w...what does it mean?
Anand.Yaligar   1/29/2014 1:29:00 PM
NO RATINGS
Moreover what the skillset the hardware engineers would have....more hardware engineers would lose job? 


@Sanjib.A, why do you think "Open source" trend will make hardware engineers lose their job ? Eventually companies do need hardware engineers to build optimal design even if most of the design is made open source.

rick merritt
User Rank
Author
Re: Open source h/w...what does it mean?
rick merritt   2/4/2014 2:57:40 AM
NO RATINGS
@Anand: Good point, Everybody WANTS to be the architect, but mostly companies need engineers to work on implementation issues.

Some would argue open hardware may eliminate a few proroetary design positions but opens to door to more folks coming up with novel architecures for the community.

prabhakar_deosthali
User Rank
Author
Patents as open source !
prabhakar_deosthali   1/30/2014 7:02:16 AM
NO RATINGS
I just hope that this open source wave will someday open the floodgates of those patents dearly held by a few to make millions.

In my opinion evey new idea  should become open source for the world!

Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed