News & Analysis
Comment
zhgreader
there will be more forgeries in oil painting markets.
Andrzej11
I forgot to add that you can also join the forum discussion here, ...
Staples to offer 3-D printing
Sylvie Barak
12/4/2012 11:38 PM EST
MOUNTAIN VIEW, Calif.—Mega store Staples is launching a new 3-D printing service in the Netherlands and Belgium starting in the first quarter of 2013, the firm has announced.
The office equipment retailer is trying to get a head start on the 3-D printing craze by allowing customers to print their designs in stores as an alternative to purchasing the machines. Some of the smallest 3-D printers available today cost in the region of $1,000.
The service, Staples Easy 3D, will also allow customers to upload their designs via the Staples website and then pick up their printed product from their local store when it’s ready.
Staples said it would be using Iris 3-D printers, manufactured by Mcor Technologies. That particular model uses reams of paper instead of plastics and resins to create products, with the paper cut to size, and stacked tightly together using glue in between layers. This allows for high-resolution layers at a thickness of 100 µ, which is the average quality for 3-D printing. The finished product has a consistency similar to wood and can be drilled, tapped, or screwed.
High definition 3-D printers can achieve resolutions of down to 25 µ.
As of now, there is no word about when Staples plans to roll out the service in the U.S.
Related stories:
The office equipment retailer is trying to get a head start on the 3-D printing craze by allowing customers to print their designs in stores as an alternative to purchasing the machines. Some of the smallest 3-D printers available today cost in the region of $1,000.
The service, Staples Easy 3D, will also allow customers to upload their designs via the Staples website and then pick up their printed product from their local store when it’s ready.
Staples said it would be using Iris 3-D printers, manufactured by Mcor Technologies. That particular model uses reams of paper instead of plastics and resins to create products, with the paper cut to size, and stacked tightly together using glue in between layers. This allows for high-resolution layers at a thickness of 100 µ, which is the average quality for 3-D printing. The finished product has a consistency similar to wood and can be drilled, tapped, or screwed.High definition 3-D printers can achieve resolutions of down to 25 µ.
As of now, there is no word about when Staples plans to roll out the service in the U.S.
Related stories:
|
|
|
|
|
Navigate to related information
resistion
12/5/2012 4:37 AM EST
Can we see a sample?
Sign in to Reply
SylvieBarak
12/5/2012 1:01 PM EST
Unfortunately Staples hasn't made pictures of its samples available yet, but I'm sure they will come January when it launches
Sign in to Reply
kjdsfkjdshfkdshfvc
12/5/2012 11:55 PM EST
actually if their using the Paper-Based 3D Printer Now Adds a Splash of Colour then heres some video you can compare samples, looks fine for producing a first draft "SylvieBarak" :)
http://www.gizmodo.co.uk/2012/11/paper-based-3d-printer-now-adds-a-splash-of-colour/
but a FORM 1 http://www.kickstarter.com/projects/formlabs/form-1-an-affordable-professional-3d-printer
would probably be better
Sign in to Reply
kjdsfkjdshfkdshfvc
12/5/2012 1:24 PM EST
when they do get them to do a "SylvieBarak" scan and print then post the sample and Open HW model :)
Sign in to Reply
iniewski
12/5/2012 2:25 PM EST
Only $1000 for a 3D printer, amazing...but not too many people will buy hardware at this price so Staple's business will do well...pls come to Canada!
Sign in to Reply
Andrzej11
12/5/2012 4:39 PM EST
The RepRap project has really brought the price of these printers down with (largely) self-printing. Kit prices go for as low as $500. I look forward to the metal version being presently developed called the MetalicaRap printer. They have a design goal of reducing the current cost of a 3d EBM printer by a factor of 100. Arcam's EBM printer presently costs about $500,000. See here, http://reprap.org/wiki/MetalicaRap
Sign in to Reply
kjdsfkjdshfkdshfvc
12/5/2012 10:52 PM EST
thats pretty cool, on a quick glance.
its a shame their thermal modeling software choice "code-aster" is so inefficient that it takes many cores to and time to perform its tasks
http://www.code-aster.org/V2/spip.php?article643 or you could use a bunch of these in a small cluster :)
Exynos 4412 ODROID-U2
http://www.hardkernel.com/renewal_2011/products/prdt_info.php?g_code=G135341370451
perhaps they will have another Code_Aster hackathon and re-factor it for AVX[2]/NEON SIMD sometime
Sign in to Reply
kjdsfkjdshfkdshfvc
12/5/2012 11:23 PM EST
actually thinking about a little more they may get even better total throughput if they take the http://julialang.org/
"Julia is a high-level, high-performance dynamic programming language for technical computing, with syntax that is familiar to users of other technical computing environments. It provides a sophisticated compiler, distributed parallel execution, "
the http://www.youtube.com/watch?v=atAdpt5SZe8 "XMOS XMP-64 Development Board" for unlimited IO and control expansion and read up on these http://phys.org/news/2012-12-team-fractal-geometry-lighter.html algorithm papers then integrate it all in a small Open Hardware space
Sign in to Reply
Andrzej11
12/6/2012 3:48 PM EST
The MetalicaRap project welcomes people's feed back. Why not post your comments here, http://reprap.org/wiki/Talk:MetalicaRap ?
Sign in to Reply
Andrzej11
12/6/2012 4:22 PM EST
I forgot to add that you can also join the forum discussion here, http://forums.reprap.org/list.php?215 .
Sign in to Reply
seaEE
12/5/2012 11:35 PM EST
I remember some of the first desktop laser printers being pretty expensive. There was one guy in our class that had one. The rest of us were printing near letter quality on dot-matrix.
So how long will it take for the 3D printer to make it down to the $50 level?
Sign in to Reply
kjdsfkjdshfkdshfvc
12/6/2012 12:37 AM EST
its not quite your £50 but its closer starting at $290 called the Quantum
http://www.digitalartsonline.co.uk/news/hacking-maker/cheap-3d-printer-pops-out-designs-at-super-high-speed/
and remember all these Open HW versions are mostly capable of self replication, so you can share with others to spread the costs :)
for fun try printing one of these related to above post, cant find the open free link to the paper though...
Sign in to Reply
kjdsfkjdshfkdshfvc
12/6/2012 12:38 AM EST
doh http://physicsworld.com/cws/article/news/2012/nov/27/ultralight-fractal-structures-could-bear-heavy-loads
Sign in to Reply
Thomas Chongruk
12/5/2012 2:43 PM EST
Here's the company who makes the printer. Lots of stuff (samples) on their site ...
http://www.mcortechnologies.com/
Sign in to Reply
zhgreader
12/6/2012 8:23 PM EST
there will be more forgeries in oil painting markets.
Sign in to Reply