Cadence has announced Virtuoso® Advanced Node, a new set of custom/analog capabilities designed specifically for the advanced technology nodes of 20 nanometers and below. Built on the Cadence Virtuoso custom/analog technology, Virtuoso Advanced Node features capabilities that prevent errors before they are created rather than detect them late in the design process. Working in concert with Cadence Encounter® RTL-to-GDSII flow, QRC Extraction and Physical Verification System, Virtuoso Advanced Node enables the development of complex mixed-signal chips that power today’s leading consumer electronics devices.
The new Virtuoso technologies address layout-dependent effects (LDEs), double patterning, color-aware layout and new routing layers. They integrate with the Cadence Integrated Physical Verification System (IPVS) — a foundry-qualified technology for signoff DRC and DPT checking — to conduct on-the-fly checks that reduce layout iterations.Features and Capabilities:LDE analysis using incremental layout
-- Virtuoso Advanced Node enables engineers to build their physical design and check it as they go, to ensure they are making the right choice at each step, rather than having to wait until the end. It delivers technology that helps decrease costly design iterations by allowing designers the ability to use partially completed layout as part of the LDE analysis, detecting layout-dependent effects at the earliest moment in the design cycle. LDEs — such as stress effects, poly and diffusion spacing/length, well proximity effects, and parasitics -- are handled with detailed test benches that analyze multiple corners to ensure that the circuit will function as specified.
When this technique is combined with Cadence MODGENs and constraints, IPVS and final hotspot detection and correction with Virtuoso DFM, users can expect up to a 30 percent improvement in their overall verification time. By methodically building and checking the design, the designer should eliminate massive “rip ups” and “reroutes” that can be found at the end if the circuit wasn’t checked along the way. Double patterning and color-aware layout
—Double patterning, a manufacturing requirement at 20 nanometers, splits the design layers into two masks, separating structures that are too close together. But double patterning brings “coloring” challenges to designers. Virtuoso Advanced Node delivers real-time automated color-aware, design-rule-driven layout to enable the creation of area-optimized layout. It provides engineers the ability to match, lock and store colors on critical nets and geometries (through schematic constraints or directly on the layout), and to identify, debug and fix errors as they go, rather than later in the design process, when they are more difficult to fix.New routing layers
—Foundries require the utilization of new local interconnect (LI) layers, or middle-of-line (MOL) layers, that are used to create densely packed routes inside complex devices. These layers have restricted design rules governing local interconnect and the vias that are used with them, presenting the challenge of maintaining signal integrity from pin to pin of the transistors. Virtuoso Advanced Node technology provides a local interconnect-aware wire editor and router that address the issue of complex LI rules.Brian Bailey
– keeping you covered
If you found this article to be of interest, visit EDA Designline
where you will find the latest and greatest design, technology, product, and news articles with regard to all aspects of Electronic Design Automation (EDA).
Also, you can obtain a highlights update delivered directly to your inbox by signing up for the EDA Designline weekly newsletter – just Click Here
to request this newsletter using the Manage Newsletters tab (if you aren't already a member you'll be asked to register, but it's free and painless so don't let that stop you).