Minimum quantity and price are mainly defined by 2 categories: 1) Targeted die size, and 2) targeted Fab-process. Theses 2 categories are much different from design to design and have great impact on price as well as on minimum quantity.
Therefore, KaiSemi offers a RFQ for a customer to fill, according which KaiSemi performs a quick calculates of die size and required optimized fab-process, and provide a quote for the specific design.
The RFQ consists of 10 simple questions about your FPGA design (as Max Frequency, used LUT amount, etc) that are informed on the FPGA report files.
In order to have a quote, considering min-quantities, please fill the RFQ on this link:
For the given example of VIRTEX-5, depending on its type and size and also design frequncy, minimum quantity is about 1K and up. Nevertheless, for having an accurate answer, you'll need to follow the link and answer those 10 Qs.
Hi regarding (1) timing and (2) RAMs:
1) Timing is closed pretty easy, because FPGAs technology has a huge overhead in timing, because in FPGAs you have huge amount of routing, junctions, fan-out buffers, on the nets and also on the clock tree. When you go to an ASIC hardening the clock tree is dedicated to a design and achieve much better skew. Also the logic area is shrinked by around 90% which ease the timing as well.
2) RAM are replaced according their functional address space and not replaced according block by block. We use RAM compiler of a proven Fab library to create RAMs on standard fab processes. The RAM's sizes are created according the functional size of the used memory.
Regarding Zero NRE, let me try to explain in short:
Zero NRE is doable for 2 reasons:
1. On the business side, the target customers are those who require cost reduction where their quantities pass the breakeven point from which it is worthy to go to an ASIC. Calculating the chip price, we take into account all our one-time expenses and manufacturing expenses amortizing into the chip price. The chip price for the quantities over the minimum, including all the expenses will be cheaper than the FPGA part price. On top of that, we quote 2 prices: 1st year chip cost and 2nd year chip cost. chip cost on the 1st year chip cost need to cover all the one-time expenses (and it is a non cancellation order), and any other order chip cost has to cover just the manufacturing cost. Usually 1st order cost is already 40-50% cheaper, and 2nd order cost is 60-70% cheaper. So you get a cheaper chip with No NRE, based on quantities. And, today, min-quantities are not high.
2. On the technical aspect it stands for backing the functional guarantee that we give meaning paying only after prototypes are approved. The functional guarantee is enabled because there is no RTL touch, no human error on the automated conversion part and vast experience.
A Book For All Reasons Bernard Cole1 Comment Robert Oshana's recent book "Software Engineering for Embedded Systems (Newnes/Elsevier)," written and edited with Mark Kraeling, is a 'book for all reasons.' At almost 1,200 pages, it ...