Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 2
mark.lapedus
User Rank
Author
re: Will Intel be a big foundry player?
mark.lapedus   11/7/2010 4:30:28 PM
NO RATINGS
If so 3D, will Intel suceed in FPGAs or not? Thoughts out there?

3D Guy
User Rank
Author
re: Will Intel be a big foundry player?
3D Guy   11/6/2010 6:11:56 PM
NO RATINGS
I think Intel will announce an acquisition of Achronix at some point (if things work well with this deal). At 22nm and below, one needs very high volumes to be successful... FPGAs could form one such business. I think Intel wants to get into the FPGA space, especially since many of the basic FPGA patents from the 1980s have expired. Its one of the few businesses in semiconductors with similar gross margins to Intel's x86 business. Instead of building a FPGA team within Intel, Intel is probably trying to get into the FPGA business through the Achronix team. Its not an easy road though... Achronix is a startup without enough volume, they will lose a lot of money trying to build products at 22nm and below due to high NRE costs (till they get enough customers and break-even) Note though, that this is all speculation on my part!!!

tektonikshift
User Rank
Author
re: Will Intel be a big foundry player?
tektonikshift   11/6/2010 5:06:28 PM
NO RATINGS
Intel has dabbled in custom chip business before, each time backing out when economy and CPU sales increased.

mark.lapedus
User Rank
Author
re: Will Intel be a big foundry player?
mark.lapedus   11/6/2010 4:39:49 AM
NO RATINGS
KB3001, Good comment. Any more out there?

KB3001
User Rank
Author
re: Will Intel be a big foundry player?
KB3001   11/6/2010 12:15:28 AM
NO RATINGS
Intel is clearly testing the waters with this deal. I am not sure Achronix business is of interest to Intel, but it's a good guinea pig to test their 22nm technology as well as the foundry model especially with the extra capacity Intel has at the moment.

RobDinsmore
User Rank
Author
re: Will Intel be a big foundry player?
RobDinsmore   11/6/2010 12:13:37 AM
NO RATINGS
Maybe they see this as a possible way to transition to 450mm fabs. Intel has a huge 300mm fab network that will not be of that much use when/if they transition to 450mm.

SiliconAsia
User Rank
Author
re: Will Intel be a big foundry player?
SiliconAsia   11/5/2010 9:52:01 PM
NO RATINGS
Intel needs a vehicle to test their 22nm process before CPU and FPGA (Other than Xilinx and Altera) is a good candidate for them. If successful, it's good for both Intel and Achronix. But Can Intel supply a volume to Achronix? Waiting to be seen....

<<   <   Page 2 / 2


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35