Breaking News
Comments
Kinnar
User Rank
Author
re: Gallium arsenide on a roll, says analyst
Kinnar   1/28/2011 5:58:06 PM
NO RATINGS
Microwave Circuits, Optical Electronics and Solar Cells are applications that highly demands GaAs, and researches may lead use of GaAs in many other applications, so it will surely give a boost to the sale of GaAs. The use of microwave band is increasing since last few decades this is also one reason of heavy increasing demand of GaAs.

amdman
User Rank
Author
re: Gallium arsenide on a roll, says analyst
amdman   1/28/2011 8:41:58 PM
NO RATINGS
What nm node are GaAs chips at? Do people still think this tech may one day replace silicon?

gaasmanwes
User Rank
Author
re: Gallium arsenide on a roll, says analyst
gaasmanwes   1/29/2011 2:14:02 AM
NO RATINGS
Bulk GaAs will never replace the 100's billions of dollars invested in Si - even if Si is only used as the substrate with a 3-5 or 2-6 active layer, it will always be "silicon" if only for PR reasons. GaAs has an excellent niche in price/performance with 0.25-0.5um (um!!) technology on 150mm wafers processed on reliable (and usually fully depreciated) cheap equipment. Having worked in GaAs (after a decade in Si) in the mid-80's thru 2000, I can says that GaAs has found its niche in RF, high-efficiency amps and other similar apps. GaAs is now, for small-scale "analog" apps, actually cheaper than Si for a GHz RF application (yeah, hard to believe from the "technology of the future and always will be..."

amdman
User Rank
Author
re: Gallium arsenide on a roll, says analyst
amdman   2/1/2011 6:53:47 AM
NO RATINGS
The AMD K7 started on 0.25um, 184mm2, 22,000,000 transistors. Also the Intel P4, etc. GaAs transmitters are an order of magnitude smaller dies, but it shows what can be done.

beatnik_8983
User Rank
Author
re: Gallium arsenide on a roll, says analyst
beatnik_8983   1/29/2011 10:47:11 PM
NO RATINGS
From personal conversation Intel will move to III-V in future for CMOS. I believe major issues with III-V remain on the process side. From my research they are way better than Si at scaled lengths.

agk
User Rank
Author
re: Gallium arsenide on a roll, says analyst
agk   1/31/2011 5:05:11 AM
NO RATINGS
Smart phones sales had increased the opportunities for many elctronic component manufactureres.This segment RF power amplifiers were once upon a time very rarely heard and used only in microwave towers.Now could see this is used in every mobile handset.GaAs MOSFET's were found only in low noise front end amplifiers but now the technolgy has taken it to power amplifier levels!

JPatH
User Rank
Author
re: Gallium arsenide on a roll, says analyst
JPatH   2/2/2011 5:08:01 PM
NO RATINGS
beatnik, re your comment: "Intel will move to III-V in future for CMOS", which III-V is complementary enough for CMOS? Last GaAs designs I worked with were MESFETs.

StevePxxxxxxxxxxxxxxxxxx
User Rank
Author
re: Gallium arsenide on a roll, says analyst
StevePxxxxxxxxxxxxxxxxxx   2/4/2011 5:27:28 PM
NO RATINGS
JPatHanna, The idea got my interest as well. Looks like there are solutions. I came across this paper, there are several copies on line, but this one has the diagrams and photos. http://english.ime.cas.cn/ns/es/201001/t20100120_50233.html

cpthollywood
User Rank
Author
re: Gallium arsenide on a roll, says analyst
cpthollywood   3/22/2011 3:24:00 AM
NO RATINGS
Have any of you heard about a company named Opel Solar? They claim to have refined the GaAs technology for military and Nasa (i assume because of its resistence to radiationa, low heat, and energy consumption). They appear to be making a move to have mass markets bid for the technology for mobile and computing devices and so on. I found it interesting you mentioned Intel planned on moving to this technology. Some of Opels Directors, are previous employees of Intel. I don't know if you are able to find out any further truth to this, or could tell if they are moving in the right direction by viewing their patents? Please let me know if any of you have heard any updates.



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Like Us on Facebook
Special Video Section
Once the base layer of a design has been taped out, making ...
In this short video we show an LED light demo to ...
The LTC2380-24 is a versatile 24-bit SAR ADC that combines ...
In this short video we show an LED light demo to ...
02:46
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...