Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 3   >   >>
SiliconAsia
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
SiliconAsia   2/21/2011 8:30:10 PM
NO RATINGS
TSMC 28nm and 40 was bad experience but others were not even present in the market.

SiliconAsia
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
SiliconAsia   2/21/2011 8:28:55 PM
NO RATINGS
There is no choice for Intel other than building all their capacity needs.

SiliconAsia
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
SiliconAsia   2/21/2011 8:27:38 PM
NO RATINGS
Becuase foundry over-capacity affects Intel's strategy and bottom line indirectly. Intel's competitors especially ATOM's competitors will get lower asp and plenti of capacity.

mranderson
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
mranderson   2/21/2011 2:59:44 AM
NO RATINGS
I don't see trouble for TSMC and GF in the future. Nor do I see trouble for Intel of Samsung. Wall Street has never liked fab expenditures, despite the fact that they drive much of the growth. TSMC hopefully will get their act together for 28nm since 40nm had significant issues. If TSMC continues to have issues at new nodes, GF may gain.

rick merritt
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
rick merritt   2/21/2011 2:07:26 AM
NO RATINGS
I suspect Otellni was trying to defend to a skeptical Wall Street his decision to commit billions to more fabs. A bigger worry for Intel may be whether Intel will be in oversupply come the 14nm generation when ARM could be making big in roads in traditional PCs.

paul.delamusica
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
paul.delamusica   2/20/2011 6:31:43 PM
NO RATINGS
:)

rfab
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
rfab   2/20/2011 3:51:52 PM
NO RATINGS
David6108 --That you are EW"s David,You are very poor level of

rfab
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
rfab   2/20/2011 3:50:11 PM
NO RATINGS
Buy an external IP. synthesize products. Measured by the generation of factory-built sealed pattern, so that the semiconductor gradually becoming less and less profit, after the TSMC 45 shattered the myth of high yield, 40NM, YELD still 40%

rfab
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
rfab   2/20/2011 3:49:59 PM
NO RATINGS
TSMC is getting behind the big INTEL, TSMC 28HP and INTEL 22 with mass production, and to know the performance behind TSMC INTEL generation, plus the amount of time to produce one generation behind, behind two generations together, and. letter to get eternal life TSMC ? TSMCYY actually very successful, so much IDM FAB-LITE, and can be effective getting worse. . . . . . "We are discussing how best to use external resources. " Chen Weiming, president of TI Asia, "Global Entrepreneur " said. OEM is the highest guiding principle of the internal Texas Instruments, which dropped after the order of 45 nm process, the large customers already had Sun Microelectronics (Sun Micro) 45 nm chip manufacturing orders to TSMC. ... make good use of external resources TI baseband market collapse, OMAP in decline

rfab
User Rank
Author
re: Intel: Foundry business is in oversupply trouble
rfab   2/20/2011 3:49:26 PM
NO RATINGS
TSMC is getting behind the big INTEL, TSMC 28HP and INTEL 22 with mass production, and to know the performance behind TSMC INTEL generation, plus the amount of time to produce one generation behind, behind two generations together, and. letter to get eternal life TSMC ? TSMCYY actually very successful, so much IDM FAB-LITE, and can be effective getting worse. . . . . . "We are discussing how best to use external resources. " Chen Weiming, president of TI Asia, "Global Entrepreneur " said. OEM is the highest guiding principle of the internal Texas Instruments, which dropped after the order of 45 nm process, the large customers already had Sun Microelectronics (Sun Micro) 45 nm chip manufacturing orders to TSMC. ... make good use of external resources TI baseband market collapse, OMAP in decline

<<   <   Page 2 / 3   >   >>


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Most Recent Comments
Like Us on Facebook
Special Video Section
The quality and reliability of Mill-Max's two-piece ...
01:34
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...